Descripción
In line with market needs, we're pleased to announce a new addition to the Tattu R-Line Version 5.0 series, well-regarded in the FPV racing and freestyle communities. This update offers pilots a wider range of power options, improving flight performance and agility.
Tattu R-Line Version 5.0 1300mAh 4S 150C lipo battery, is designed for efficiency and reliability. It's an ideal match for 3 to 5-inch FPV drones, providing a balance of weight and power for competitive racing.
Featuring our unique Al Boehmite technology, the Tattu R-Line Version 5.0 series enhances overall performance and power consistency.
Note: Please do not choose expedited shipping unless you live in greater Sydney as batteries cannot be shipped by Air.
Tattu V5 1300mAh 4S 150C Features:
- First use of X technology Al Boehmite
- Highly consistent and continuous power output
- Less decrease in performance after cycles
- Higher discharge platform
- Resistance to dropping
Tattu V5 1300 mAh 4S 150C Battery Application:
Equipped with industry-standard XT60 Balance Plug compatible with LiPo balance chargers for your 3 to 5-inch FPV drones.
Specifications
- Capacity(mAh): 1300
- Voltage(V): 14.8V
- Configuration: 4S1P
- Discharge Rate (C): 150
- Connector Type: XT60
- Length(±5mm): 75
- Width(±2mm): 38
- Height(±2mm): 27
- Net Weight(±20g): 156
- Discharge Wire Length(mm): 60mm
- Wire Gauge: 12#
- Balancer Connector Type JST-XHR-5P
- Balancer Wire Length(mm): 35mm
Lipo Battery Safety
- Batteries should NEVER be left unattended while charging.
- Be absolutely sure that the Lithium Polymer charger settings are correct for the battery pack being charged – both voltage and current settings.
- Lithium Polymer must be CHARGED and STORED in a fire-safe container like a Lipo Sack.
- Do not charge batteries near flammable items or liquids.
- Keep a dry fire extinguisher nearby or a large bucket of dry sand, which is a cheap and effective extinguisher.
- Never charge inside an automobile even when parked.
- KEEP BATTERIES AWAY from children and pets at ALL times.
- Never discharge below 3.5V per cell as it may cause permanent damage and void warranty
- Battery may explode if damaged or disposed of in fire
- Never leave batteries inside a car on a hot day or any other place where the temperature may exceed 140F / 60C.
- Although environmentally friendly, lithium polymer cells must be FULLY discharged before disposal. Use a resistor setup (light bulbs, for example) to accomplish this, to avoid the possibility of a short-induced fire after disposal.
- Immediately discharge damaged batteries at 1/2 C rate and dispose
- Do not put the loose cells in a pocket, bag, or drawer where they could short-circuit against other items, or the battery tabs could be pressed against each other.
- Take care that the cells are not punctured, especially by metallic objects like hobby knives.
- If the electrolyte in the cells should get on your skin, thoroughly wash with soap and water. If in the eyes, rinse thoroughly with cool water. Immediately seek medical attention for this, or for burns.
Gastos estimados de envío
You may also like
