Descripción
Fly-Ready. Digital HD. Unleashed.
The Protos Kit from CADDXFPV delivers a full-blown digital FPV (First Person View) experience straight out of the box. Whether you’re a beginner jumping into FPV for the first time or upgrading your gear, this is built to impress.
Key Features
- True plug-and‐play setup – Arrives fully built and tuned so you can get flying immediately.
- Ultra‐light yet capable drone – Weighing around 104 g with dimensions 110×102.8×41 mm, the drone stays agile while still packing serious tech.
- High-quality digital video feed – Equipped with the “Ascent Lite” system offering 1080p/60fps video transmission, ultra-low latency (~30-35 ms) and a wide 147° field of view.
- Strong imaging even in low light – 0.01 lux sensor means you’re not just limited to bright daylight.
- Reliable control link – Uses ELRS 2.4GHz receiver protocol for responsive, long‐range performance.
- Multiple flight modes – Beginner-friendly hover/pos-hold, self-leveling, and full Acro mode for stunt or pro flying.
- Comprehensive kit – Drone + goggles + radio controller + batteries + charger in a neat compact carry case.
Manual available here















Package includes
- 1 × CADDXFPV Protos Drone
- 1 × FPV Goggles
- 1 x Goggle Battery
- 1 × Radio Controller
- 3 × 840mAh LiPo Batteries
- 1 × 3-in-1 Battery Charger
- 4 × Spare Propellers
- 1 x Spare Canopy
MANUAL
Specifications
Protos
- Flight Control: Caddx Protos Aio 1.0
- Video Transmission: Ascent Lite
- Motor Diagonal Distance: 78mm
- Motor: 1102 14000KV
- Propeller: HQprop U40mmx3GR PC 1.5mm
- Weight: 104.4g±1.5g
- Dimensions: 110x102.8x41mm
- Flight Endurance: 8.5min ±0.5min
- RC Receiver: ELRS 2.4GHz
FC
- Main Control Chip: STM32-F405RGT6
- Gyroscope: BMI270
- Barometer: SPL06
- Onboard Receiver: ESP8285
- Receiver Protocol: ELRS 2.4GHz
- ESC Protocol Compatibility: Bluejay / BLHeli-S Optional
- ESC Maximum Current: 12A (Single Channel)
VTX
- VTX Model: Ascent Lite
- Image Sensor: 1 / 2.8 inch Sensor
- FOV: 147°
- Ratio: 16:9
- Resolution: 1080P 60FPS;720P 60FPS
- Built-in Storage: N/A
- Max Transmission Range: Max 3km
- Latency: Average delay 35ms
- Power: 25~100mW
Ascent Goggles
- Communication Frequency: 5.725-5.850GHZ
- Transmit Power (EIRP): FCC:<30dBm; CE:<14dBm; SRRC:<20dBm; MIC:<25dBm
- I/O Interface: 4Pin 3.5mm Plug, DC5.5*2.1mm, Micro SD Card Slot
- Transmission Resolution: 1080P60FPS, 720P60FPS
- Code Rate: Max 50 Mbps
- Minimum Latency: Average 32ms
- Average Gain: 4.9dBi
- Polarization: LHCP
- Transmission Distance: >4km
- Channel: 8
- Screen Resolution: 1920*1080 / 60Hz
- Screen Material: LCD
- Screen Size: 4.5 Inch
- Wide Voltage Input: 6V~25.2V (2S~6S)
- SD Card Slot: Support 256G
CADDXFPV A-link Transmitter
- Main Control Chip: AT32 F413RCT7
- RF Module: ELRS 2.4GHZ
- RF Protocol: CRSF
- Max RF Power: 100mW (20dB)
- Number of Available Channels: 10 Channels (including 4 joystick channels)
- Joystick Type: Full-Bearing Hall-Sensor Joystick Assembly
- Function Switch:
- 1x Latching Button
- 2x Momentary Buttons
- 2x 3-Position Toggle Switches
- 1x Scroll Wheel
- Status Indicator Module: 4x Status Indicator LEDs / Buzzer
- Charging & Communication Interface: USB-Type C
- Battery Specification: Lipo 1s 1000mAh
- Max Charging Power: 5V / 1A / 3.50W
- Operating Voltage Range: DC 3.50V~4.20V
- Dimensions: 158mmx108mmx58mm
- Weight: 180g±5g
2S Charger
- Name: 2S Charger
- Display: LEDx4
- Channel: 3 (Sequential Charging)
- Function Selection: Charging, Storage
- Battery Type: Li-ion 2S 840mAh Battery
- Input Voltage: 12‒15V (PD Input, 5V Adapter Not Supported)
- Output Voltage: 8.7V
- Input Current: Max.3A
- Charging Current: Max.3A
- Balancing Current: Max.0.21A
- Charging Power: Max.25W
- Discharging Power: Total Power: 5W (Max 1.6W per Channel)
- Interface: Type-C
- Operating Temperature: -10~45℃
- Storage Temperature: -20℃~60℃
- Dimensions: 94x63x39.1mm
- Weight: 65±0.5g
2S Battery
- Name: 2S Battery
- Battery Type: Li-ion (Lithium-ion Battery)
- Battery Capacity: 840mAh
- Battery Specification: 2S1P (2 Cells in Series, 1 in Parallel)
- Discharge Rate (C-Rate): 15C
- Maximum Power: 6.384Wh
- Voltage Range: 6.80V~8.70V
- Max Charging Voltage: 8.5V
- Charging Method: 2S Charger
- Charging Time: ≤20min
- Protection Mechanism: When the voltage of a single cell drops below 2.8V, battery lock protection is triggered and charging is required to reactivate.
- Dimensions: 77.5x24x21mm
- Weight: 41.9g±0.5g

