Tattu 22000mah 22.2v 25c 6s Lipo Battery with AS150 + XT150 Plug

Save 19%
TattuSKU: TA-25C-22000-6S1P-AS150
1 review

Price:
Sale price$430 Regular price$532

Shipping calculated at checkout

Stock:
In stock (2 units), ready to be shipped

Description

Tattu 22000mah 22.2v 25c 6s1p Lipo Battery with AS150 + XT150 Plug

The 6S 22.2V 22000mAh LiPO battery pack is the best choice to match DJI S1000 professional aerial photography equipment. This battery packs a ton of power in a compact form factor, giving you the flight time you need on your heavy-lift aerial photography rigs.

NOTE: Please do not choose expedited shipping unless you live in greater Sydney as batteries cannot be shipped by Air.

Tattu batteries provide high quality, reliable power for your Multirotor or Aircraft.

All Tattu LiPos are packed with vibration-proof & fire-proof material and our luxury battery box. Make sure you get your battery in perfect condition. An automatic procedure & Computer system battery cell matching process ensures the batteries stability and quality. Different from the original Gens Ace series, TATTU is specialized for the UAV & UAS market, with their industrial quality (since Gens Ace is based on the Hobby area), their slogan "less is more", "more" means more flight time, more enjoyment, and more satisfaction , and "less" means less weight, simple design. Tattu always develops their products according to these 2 directions giving you a high quality battery.

Features

  • Stable automatical stacking technology makes the single cell capacity can reach 22000mAh.
  • The most strict single cell capacity, voltage, resistance, discharge curve matching process.
  • Superior Japan and Korea Lithium Polymer raw materials.
  • Almost 200Wh/kg energy density.
  • At least 150 times cycle life.

Specification

  • Capacity: 22000mAh
  • Voltage: 22.2V
  • Max Continuous Discharge: 25C
  • Max Burst Discharge: 50C
  • Weight: 2544g
  • Dimensions: 198*91*66 mm
  • Balance Plug: JST-XH
  • Discharge Plug: 7mm AS150 Anti Spark Self Insulating Gold Bullet Connector
  • Charge Rate: 1-3C Recommended, 5C Max

Lipo Battery Safety 

  • Batteries should NEVER be left unattended while charging.
  • Be absolutely sure that the Lithium Polymer charger settings are correct for the battery pack being charged – both voltage and current settings.
  • Lithium Polymer must be CHARGED and STORED in a fire-safe container like a Lipo Sack.
  • Do not charge batteries near flammable items or liquids.
  • Keep a dry fire extinguisher nearby or a large bucket of dry sand, which is a cheap and effective extinguisher.
  • Never charge inside an automobile even when parked.
  • KEEP BATTERIES AWAY from children and pets at ALL times.
  • Never discharge below 3.5V per cell as it may cause permanent damage and void warranty
  • Battery may explode if damaged or disposed of in fire
  • Never leave batteries inside a car on a hot day or any other place where temperature may exceed 140F / 60C.
  • Although environmentally friendly, lithium polymer cells must be FULLY discharged before disposal. Use a resistor setup (light bulbs, for example) to accomplish this, to avoid the possibility of a short-induced fire after disposal.
  • Immediately discharge damaged batteries at 1/2 C rate and dispose
  • Do not put the loose cells in a pocket, bag, or drawer where they could short-circuit against other items, or the battery tabs could be pressed against each other.
  • Take care that the cells are not punctured, especially by metallic objects like hobby knives.
  • If the electrolyte in the cells should get on your skin, thoroughly wash with soap and water. If in the eyes, rinse thoroughly with cool water. Immediately seek medical attention for this, or for burns.

Tattu 22000mah 22.2v 25c 6s1p Lipo Battery with AS150 + XT150 Plug

Estimate shipping

You may also like

Recently viewed