DIY MOLEX PICOBLADE 1.25MM CABLE KIT

Your FC, Camera or 4in1 ESC manufacturer does not include the harness you need?
With this kit you don't need to try finding the matching harness.
Kit includes every single size of Molex PicoBlade 1.25mm connectors from 2 pin all the way to 12 pin and 3 different length silicone wire set.

Please note that most flight controllers and ESC,s use JST-SH1.0 connectors so please check which ones you need.

Our JST-SH1.0 kit is available HERE

Includes;

• 18x Double crimped cables - 5cm
• 18x Double crimped cables - 10cm
• 18x Double crimped cables - 15cm
• 3x 2-pin Molex PicoBlade 1.25mm
• 3x 3-pin Molex PicoBlade 1.25mm
• 3x 4-pin Molex PicoBlade 1.25mm
• 3x 5-pin Molex PicoBlade 1.25mm
• 3x 6-pin Molex PicoBlade 1.25mm
• 3x 7-pin Molex PicoBlade 1.25mm
• 3x 8-pin Molex PicoBlade 1.25mm
• 3x 9-pin Molex PicoBlade 1.25mm
• 3x 10-pin Molex PicoBlade 1.25mm
• 3x 11-pin Molex PicoBlade 1.25mm
• 3x 12-pin Molex PicoBlade 1.25mm