SpeedyBee BL32 50A 4-in-1 ESC


Sale price$71

Shipping calculated at checkout

Contact Us


SpeedyBee BL32 50A 4-in-1 ESC
SpeedyBee F7V3 STACK
When we say 50A, we mean it.
Real 50A output, ready for your baddest, meanest 6S motors.
Blast through any obstacle during freestyle with no worry, or
keep that highest throttle position during races.
SpeedyBee F7V3 STACK
1500uF Low ESR capacitor + TVS protective diode = Extra protection
The ESC is built with TVS protective diode to absorb the voltage spike when you plug in the battery, or during crashes that block your props.
We also provide a humongous 1500uF low ESR capacitor, ensuring clean data from the gyro to the FC.
Tested by 2 top racing pilots with both over 1500 packs, or you can put it to the test yourself.
SpeedyBee F7V3 STACK
Wanna crank it up to 128KHz PWM?
Why not?
With F4 MCU, you can set the PWM frequency up to 128KHz. Find the best PWM frequency* to get for your build without any limitation.
* The ideal PWM frequency for each build varies depending on the frame, motors, props, and other factors. Higher PWM frequency
doesn't necessarily means smoother flight.
If the default 48KHz is not working for your build, you can increase the value gradually until you find the sweet spot.
Check your motor temperature to avoid overheating.
SpeedyBee F7V3 STACK
CNC heat sink shield = no overheating in any condition
Built with high-quality CNC heat sink to significantly reduce the heat from your MOSFETs ensuring stable current flow at a high throttle position.
Great benefit in a stylish blue finish.
SpeedyBee F7V3 STACK
SpeedyBee F7V3 STACK
SpeedyBee F7V3 STACK
  • Product Name SpeedyBee BL32 50A 4-in-1 ESC
  • Firmware SpeedyBee BL32 50A
  • Configurator Download Link http://github.com/bitdump/BLHeli/releases
  • Continuous Current 50A * 4
  • Burst Current 55A(5S)
  • TVS Protective diode Yes
  • Heat Sink Yes
  • External Capacitor 1500uF Low ESR Capacitor(In the package)
  • ESC Protocol DSHOT300/600
  • Power Input 3-6S LiPo
  • Power Output VBAT
  • Current Sensor Support (Scale=490 Offset=0)
  • Mounting 30.5 x 30.5mm( 4mm hole diameter)
  • Dimension 45.6(L) * 40(W) * 8.8mm(H)
  • Weight 19.2g with heat sink

You may also like

Recently viewed