MATEK F411-WSE WING FLIGHT CONTROLLER

F411-WSE

  • $46.00

Only 9 left!
Add to Wishlist

F411-WSE Quick Start Guide   (PDF 9M)


 

FC Specifications

  • MCU: 100MHz STM32F411CEU6
  • IMU: MPU6000 (SPI)
  • Baro: BMP280 (I2C)
  • OSD: AT7456E (SPI)
  • Blackbox: No
  • 2x Uarts
  • 2x Softserial-Tx
  • 2x Motors, 4x Servos outputs
  • 1x I2C
  • 4x ADC (VBAT, Current, RSSI, AirSpeed)
  • 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
  • Switchable Dual Camera Inputs
  • TR/SA VTX control: Yes
  • WS2812 Led control : Yes
  • Beeper output: Yes
  • RSSI: Yes
  • Voltage devider for Analog Airspeed sensor: Yes

FC Firmware

PDB

  • Input voltage range: 6~30V (2~6S LiPo)
  • 2x ESC power pads
  • Battery Voltage Sensor: 1:10 (Scale 1100)
  • Current Senor: 78A,  3.3V ADC,  Scale 423

BEC 5V output

  • Designed for Flight controller, Receiver, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed module
  • Continuous current: 2 Amps, Max.3A(5seconds/minute)

BEC Vx output

  • Designed for Servos
  • Voltage adjustable, 5V Default, 6V option
  • Continuous current: 3.5 Amps, Max.5A(5seconds/minute)

BEC 3.3V output

  • Designed for Baro / Compass module/OLED and Spektrum RX
  • Linear Regulator
  • Continuous current: 200mA

Physical

  • Mounting: 24 x 24mm, Φ2mm
  • Dimensions: 28 x 28 x 14 mm
  • Weight: 8.5g

Important Notes: 

  • Before soldering or mounting any flight controller, connect it to your PC and verify operation
  • Incorrect soldering techniques will damage this board and void warranty. Please use the correct sized tip, temperature and technique. Temp controlled soldering irons (such as the TS100) are available for under $100 and will make soldering much easier.
  • Lifted pads are a result of incorrect soldering techniques or excess mechanical pressure and will not be covered under warranty. 
  • USB ports must be handled with care, breakage of usb ports are not covered under warranty
  • Always use a smoke stopper before powering your build for the first time. 


We Also Recommend