LOOKING TO BUY A MAMBA F40 _BLS MINI DSHOT600 4IN1 ESC 40A 6S IN AUSTRALIA? YOU'VE COME TO THE RIGHT PLACE. ANY QUESTIONS? PLEASE LIVE CHAT US, WE'RE HERE TO HELP!
CHECK OUT OUR GREAT RANGE OF DIATONE PRODUCTS HERE
- INPUT VOLTAGE: 2~5S Lipo (8.4V~25.2V)
- CONTINUE CURRENT: 40A×4
- BURST CURRENT: 45A (10S)
- BEC: No
- Target：BLHeli_S CH40
- SUPPORTS: Dshot300/600
- TVS Protection: Yes
- MOUNTING: 20mm, M2/M3
- 8pin sh1.0 cable ×2
- AMASS Original XT60
- High-Frequency 470uF/35V capacitor
- Before soldering or mounting any flight controller, connect it to your PC and verify operation
- Incorrect soldering techniques will damage this board and void warranty. Please use the correct sized tip, temperature and technique. Temp controlled soldering irons (such as the TS100) are available for under $100 and will make soldering much easier.
- Lifted pads are a result of incorrect soldering techniques or excess mechanical pressure and will not be covered under warranty.
- USB ports must be handled with care, breakage of usb ports are not covered under warranty
- Always use a smoke stopper before powering your build for the first time.
- Please note due to the possibility of causing heat damage when soldering, once this product has been modified and or soldered to warranty is voided.