ISDT SMART CHARGER Q6 PRO BATTGO 300W/14AISDT Q6_PRO
Improving on one of the smallest balance chargers in the world, the Q6 Pro is a revolution that fits in your pocket. The latest in the Q6 series from iSDT the Q6 Pro supports Battgo™ technology, a new communication standard that chargers and dischargers use to talk to each other. Whenever & wherever easily access battery data and historical record.
The Q6 also features a wide input voltage, 300watts and 14 amps of charge current along with up to 3amps of discharge current. The iSDT Q6 series has quickly become a favorite among hobbyists.
Navigating the menus with the scroll wheel is a breeze, much easier than pressing a button 20 times. The rounded corners allow you to place it in your bag without hurting any of your gear - or since it's so small, you can even stick it in your pocket!
With a wide range of input voltage (7-32V) meaning you can use up to a 7s battery source (got some old 6s heli packs laying around? - this will make good use of them!)
Please note: This charger is DC input only, AC operation will require an external DC power supply.
2.4″ IPS Display
- up to 178° visible angle, auto-brightness screen, still visible under strong sunlight.
Highly optimized internal construction with higher cooling efficiency.
- High-speed and efficient synchronous Digital Power Supply Technology.
- High-speed ball-bearing fan promotes active cooling increase by 300%, even though the size has been reduced by 50%.
ARM 32bit high-speed processor
Instant Boot (within seconds) when initialized
- After the depth of optimizationscOs，Instant Boot, takes only a few seconds
- One key metal shuttle control replaces the multi-button press operation, makes charging with the Q6+ a delightful experience.
scOs Specially designed for smart charging OS
- Bright, colorful, easy access set-up and status display. 80% deduction of operation process. Firmware updates can be performed using a personal computer.
3rd Generation Smart Balance Charger
- Increased accuracy, with slight charging voltage adjustment capability.
- Supports English, German, French, Spanish, Japanese, Traditional Chinese, and Simplified Chinese.
- Input Voltage: DC 7-32V
- Output Voltage: 0-30V
- Charge Current: 0.1-14.0A
- Discharge Current: 0.1-3.0A
- Maximum input current: 15A
- Max Charge Capacity: 300W
- Max Discharge Capacity: 8W
- Balancing Current: 1A/cell
- Balance Cells: 2-6S
- Supported Battery Type：LiFe/Lilon/LiPo/LiHv (1-6S), NiMH/Cd(1-16S), Pb(1-12S)
- BattGO Support Smart Battery: Output support
- Display: 2.4〃320×240 IPS LCD
- Operating Temperature: 0-40°C
- Storage Temperature: -20-60°C
- Dimensions: 80x80x33.5 mm
- Weight: 119g
- This charger does not include a power cable, available here
- Batteries pose a SEVERE risk of fire if not properly handled
- Read Entire operation manual before using a charger
- This unit may emit heat during use
- Only operate this device in a cool ventilated area away from flammable objects
- Failure to observe safety procedures may cause damages to property or injury
- This charger is DC input only, AC operation will require an external DC power supply.
- 1x ISDT Q6 Pro BattGo™ Charger
We Also Recommend
TOOLKITRC M8S 400W 18A CHARGER, CELL CHECKER,, SERVO & SIGNAL TESTER
XT60 TO 4IN1 CHARGE CABLE FOR ISDT, TOOLKITRC AND OTHER XT60 INPUT CHARGERS