FPV Worry Free High Performance Waterproofing By Branden FPV


Sale price$13

Shipping calculated at checkout

Contact Us


There's never a time when waterproofed electronics don't come in handy. Whether it's winter snow, pesky office park sprinklers, the occasional flight through a 1,000 foot waterfall or even a crash in a stream. The Brandon FPV Worry Free FPV waterproofing kit is your ticket to longer lasting electronics.


Item Details

  • Includes: 1x Tube of Worry Free FPV
  • 1x Applicator Brush
  • 1x Applicator stick
  • 1x Applicator Toothpick
  • Brandon FPV Stickers


  1. Tear down all parts so you can easily put Worry Free FPV on, no need to unsolder.
  2. Clean up all surfaces with air blower, brush, or cloth to avoid dust, oil, moist or any other things that cover it.
  3. Apply Worry Free FPV to all components such as flight controller, VTX, camera boards evenly and slowly. Let dry for 15-20 minutes and then continue to add additional coats as needed to ensure all desired surfaces are covered.
  4. To coat FPV camera you can put Worry Free FPV on camera connector, on camera case especially on connection between case, and FPV camera focus ring
  5. Do not coat wiring harness connectors.
  6. Do one side at a time or wait until Worry Free FPV is dry then move to the other side.

Please Note

The application of this product does not guarantee your electronics will be waterproof. Please always allow time to dry (usually 24h) and test to ensure all desired surfaces are covered.

If you cover chips such as a barometer you may lose the functionality of the chip.

You may also like

Recently viewed