FATSHARK SHARK BYTE - DIGITAL HD VIDEO SYSTEM (BUNDLE)

TX5S.1VTX

  • $372.00

Add to Wishlist

PRE-ORDER NOW OPEN ETA LATE DECEMBER - PLEASE NOTE ADDING OTHER ITEMS WITH THIS ITEM WILL DELAY THEM UNTIL THIS PRODUCT ARRIVES

Please make sure to select required VTX before adding to cart.

Are you looking to buy Fatshark Shark Byte - digital HD video system in Australia? You have come to the right place!

Why buy your Fatshark products from NextFPV in Australia?

  • FREE standard shipping on all items over $119AUD (Australia Only)
  • The only goggle company with 2 year parts and labour warranty with a local repair centre in NSW
  • Official listed Distributor of Fatshark products for Australia. 
  • The largest range of Fatshark headsets and accessories in Australia (check it out here)

Shark Byte delivers near-zero visible latency High Definition 720p 60FPS video on your Fat Shark HDO2, HDO, HD3, and more. This digital HD system supports up to eight operators on standard 5.8GHz FPV frequencies and can be used alongside analog systems without interference.


Introducing Shark Byte, Fat Shark's 2nd generation digital HD system.

Shark Byte delivers near-zero visible latency High Definition 720p 60FPS video on your Fat Shark HDO2, HDO, HD3, and more. This digital HD system supports up to eight operators on standard 5.8GHz FPV frequencies and can be used alongside analog systems without interference.

Shark Byte has a brand new compact goggle mounted module with integrated DVR and directional antenna. While mounted, the Fat Shark goggle can be seamlessly switched between digital and analog. Goggles can be even stored in their case without removing the digital module!

The goggle and module can both be powered by an existing Fat Shark battery* (with included balance lead adapter). For longer flight days, the system includes an XT-60 terminated adapter with a regulator to supply 8.4V to goggles and modules from standard 3S or 4S battery packs.

Image clarity has been improved with a new fully digital MIPI camera developed by RunCam; the RunCam Racer HD. The small 14x14mm footprint camera is suitable for the smallest of builds and comes with an adapter to facilitate mounting to larger frames. The camera has an OSD for custom tuning that can be navigated either by a button board or the radio control sticks (requires BetaFlight).

The transmitter size has been reduced and now uses standard 20x20 mounting holes. Power has been upped to 500mW and can be initiated in a standby mode that bumps to full power only when the quad is armed. The transmitter and quad PID settings can be navigated with radio sticks via an OSD or programmed using an external button board.

*The Fat Shark goggle battery option results in reduced operating times. Please check the power level of your goggle battery before every flying session and never begin flying with a low goggle battery.

Specifications

Shark Byte Goggle Module Specifications

  • Weight: 80.3g
  • Dimensions: 105 x 21 x 39mm
  • Operating Frequencies: 5.725-5.850GHz
  • Input Power: 5.5mm Barrel Connector, 8-16V Center Pin Positive
  • Operating temperature: 32°-104°F (0°-40°C)
  • Compatible Headsets: Fat Shark Dominator series

DO NOT use 5S or 6S batteries to power the VRX or headset. If you connect a 5S or 6S LiPo Battery to the VRX it may cause permanent damage.

The VRX and Fat Shark goggles do not include a low voltage alarm. Always check the charge status of your batteries before flying and never fly on low batteries. We recommend using an in-line battery alarm (not included) between the battery and DC cable

Air Unit Specifications

Weight: 15.4g including camera and cable (without antenna), 10.0g for VTX only

Dimensions:

  • Camera: 14 x 14mm with 19 x 19 adaptor
  • VTX: 25 x 32 x 12 mm
  • Coaxial cable: 85mm

Mounting Pattern: VTX: 20 x 20mm, M2
Operating Frequencies: 5.725-5.850GHz
Transmitting Power: 25, 200 and 500mW

IO Interface:

  • MMCX
  • UART: 3.3V
  • Update Port: 7-pin SH 1.0

Supported Flight Control System:

  • BetaFlight: 4.1 or above (MultiWii API version 1.41)
  • iNav 2.3 or above

Input Power: 7-26V
Operating temperature: 32°-104°F (0°-40°C)

Included

  • 1x Camera Shark Byte RunCam Nano HD
  • 1x Video Transmitter (Choose TX5M.1 or TX5S.1)
  • 1x Video Receiver Shark Byte RX5.1
  • 1x Stock Cable Set 8cm

Please note: Rapidfire module & antennas NOT included



    We Also Recommend