MAMBA Basic F405 MK3
- Add I2C function
- When you connect the USB, the receiver and OSD settings can be saved
- Increase the pad area
- LED signal selection （when Mamba Led sys avaiable）
- BEC short circuit protection
- TVS instant high voltage protection 30V
- Upgrade the anti-interference cable
- Use Type c（Most）
- The pad area of the Mini flight controller (20×20) increased by 140%
- Add self-recovery insurance to the receiver's 5V power supply.
- Increase the camera VCC power supply pad.
- The standard flight controller (30.5×30.5) adds a spare pad.
- Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference.
Mamba Basic F405 MK3 FC
- MCU: 168MHz STM32F405RGT6IMU: MPU Series Six-Axis
- Barometer: Yes
- OSD: Yes
- Blackbox: 16M Flash Memory
- Uarts: 6Set
- ESC Soft: Dshot300/600/1200
- ESC Telemetry: Yes
- Power Led: Yes
- LED Controller: BF LED/MB LED（ 4 Set 2812 LED）
- F.Port: Yes
- RSSI: Yes
- Buzz: Yes
- Input: 3~6S Lipo (12.6~25.2V)
- TVS Protection: Yes
- BEC:3.3V 0.5A& 5V 3A (System Power))& 5V 3A(LED )& 9V 3A
- MOUNTING: 30.5mm,M3