ATOMRC Dolphin 845mm Wingspan FPV RC Airplane (Kit, PNP, FPV)

4 reviews

Type: FPV
Sale price$200

Shipping calculated at checkout

In stock (15 units), ready to be shipped


The ATOMRC Dolphin 845mm Wingspan FPV RC Airplane is an EPP molded wing, embedded with carbon fiber tube, durable and lightweight. Features a detachable head and wing, a rubber band and magnet (to lock your GoPro), air inlet and outlet for FPV gear cooling, pre-installed wing, fuselage protector, and other cool features that make thing wing a must-have!





  • EPP molded wing, embedded with carbon fiber tube, durable and lightweight.
  • Carbon fiber tube enhanced elevens, more rigid elevens during the high-speed flight.
  • Detachable wing, portable to transport.
  • Detachable head, two head for choice, users can choose to fly with GoPro or without GoPro.
  • Rubber band and magnet to lock the GoPro, easy to install the GoPro.
  • V tail design makes the wing more stable than a normal fly wing.
  • Pre-installed wing and fuselage protector, more durable during landing.
  • Compatible with GoPro hero 5~7.
  • Movable battery slot for better “CG” adjustment.
  • Pre-installed camera cable and antenna for FPV gear.
  • Air inlet and outlet for FPV gear cooling.


  • Brand Name: ATOMRC
  • Item Name: Dolphin
  • Wingspan: 845mm(33.2")
  • Length: 710mm(28")
  • Motor: 2306 1700KV
  • ESC: 30A with 5V/3A BEC
  • Servo: 2pcs 9g servo
  • Propeller recommend: 5~6 inch
  • Battery recommend : 4S 1300-2200mah
  • Dimension: 660*225*135mm

Recommend Parts (not included in kit version):

  • Motor: 2306
  • ESC: 30A with 5V/3A BEC
  • Servo: 2pcs 9g servo
  • Propeller: 5-6inch
  • Battery: 4S 1300-2200mah (Not Included)
  • Radio: more than 6CH (Not Included)

Includes (select version before adding to cart)

Kit Version

  • 1 x Prebuild Dolphin Kit
  • 1 x Ball Push/Push Rod
  • 1 X Sticker
  • 1 x Battery Strap
  • 1 x Camera Cable
  • 1 x SMA to UFL VTX cable
  • 1 x Screws
  • Requires: Radio, Receiver, Battery, Charger, ESC, Motor, Servos AND FPV set up.

PNP Version

  • 1 x Dolphin KIT
  • 1 x 2306 Motor
  • 1 x ATOMRC Exceed 30A BLS 5V/3A BEC
  • 1 x ATOMRC Exceed 9g Servo*2
  • Requires: Radio, Receiver, Battery, Charger AND FPV set up.

FPV PNP Version

  • 1 x Dolphin PNP
  • 1 x Foxeer Razer Nano 1200TVL 14mm Camera
  • 1 x ATOMRC Exceed 500mW Mini VTX
  • 1 x 5.8G Antenna
  • Requires: Radio, Receiver, Battery and Charger 

Estimate shipping

Customer Reviews
5.0 Based on 4 Reviews
5 ★
4 ★
3 ★
2 ★
1 ★
Customer Photos
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
Craig M.
Australia Australia

Excellent Service & Great Product !!

Great service from Next FPV... Fast Postage & great communication... Very Pro Seller here... Highly Recommended... :-)

Graeme A.
Australia Australia

ATOMRC Dolphin

Very impressed. Quality is excellent. Flies really really well. I have a Matek F765 WSE flight controller and a Runcam Phoenix HD FPV fitted. T Motor F40 Pro II, 2400kv and a T Motor 30amp ESC. I am very happy with this plane and the great service from Next FPV. ATOMRC Dolphin 845mm Wingspan FPV RC Airplane (Kit, PNP, FPV) Review
Australia Australia

So good!

A great little compact "wing" if you want to detach the wings and pack it into a small box/ case then its great. I purchased the PNP white version with stock motor and electronics. Flight performance is best suited to intermediate skills upward and with a 2200mah 4s has enough endurance to fly 18km with a strong headwind. I have set up a mini pixhawk with a RFD900ux and has plenty of room for my fat fingers and has a light wing loading.

David L.
Australia Australia

AtomRC Dolphin

The flight characteristic of this wing is excellent. Easy to Launch. Plenty of room for equipment in the rear area. Good fun to fly

You may also like

Recently viewed