• $37.00

Only 5 left!
Add to Wishlist

The APD PDB360 is designed for high voltage and high current applications up to 360Amps. This PDB can sustain up to 90A continuous to each ESC leg, with peaks of 120A. Also features 12V 3Amp and 5V 1Amp regulators with a maximum of 12S (50.2V) input.

Further, it has double sided main input power pads which can be soldered or bolted to. It allows for flight controller mounting with standard 30.5mm x 30.5mm hole spacing. Solder tabs extend off the PCB to allow for thermal relief to make soldering easier.

Manufactured using high temperature fibreglass to sustain continuous high temperature scenarios. Rest assured, your solder tabs won’t fall off, even with excessive heat.

  • 4S-12S input
  • 8 Layers of 3oz copper to each ESC
  • 12V @ 3Amp switching regulator
  • 5V @ 1Amp switching regulator
Overcurrent and short circuit protection on both 5V and 12V regulators
Allows for ESC’s to be bolted on with 2.5mm bolts
Allows for main power inputs to be bolted on with 3mm bolts
Has two main power inputs
Thermal relief on all solder tabs to allow for easier soldering

We Also Recommend