{"title":"FrSKY Receivers","description":"","products":[{"product_id":"new-frsky-x8r-rx-8-16-channel-sbus-smart-port-receiver-with-pcb-gain-antenna","title":"FrSKY X8R 2.4Ghz 8\/16 Channel w\/ PCB gain Paddles (w\/telemetry)","description":"\u003cp\u003eFrSky's flagship full size receiver features 16 channels (8 normal pwm outputs and all 16 channels on the dedicated Sbus output). Plus the super smart \"Smart Port\"\u003cbr\u003e\u003cbr\u003eSmaller than the previous 8 channel receivers, but now packing 16 channels and the new Smart Port that supports the new hubless digital sensors! Or, connect the new vario, and then connect the old hub to use existing analogue sensors. \u003cbr\u003e\u003cbr\u003eA common question we get is how do you get all 16 channels out of the X8R? Well, FrSky has given you options. You can use the Sbus line to access all 16 channels. Using something like the FrSky Sbus Decoder, you can convert the digital Sbus signal to normal servo outputs. You can connect Sbus servos directly to the Sbus line, frSky will have several servo options very soon. Or you can combine 2 X8Rs and output channels 1-8 on the first receiver, and output 9-16 on the second receiver. \u003cbr\u003e\u003cbr\u003eBut that isn't all the X8R can do. It can also work in \"D8 Mode to work with the DHT, DJT, DFT and DHT-U transmitter modules. In this mode you have 8 channels. The neat trick is the Smart Port still works in D8 Mode!\u003cbr\u003e\u003cbr\u003eYou are probably wondering about the new antennas on the X8R. FrSky refers to these as PCB antennas and report upto a 20% range increase over the standard antennas. (The X8R is also available with a standard antenna version, handy for full carbon aircraft.)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimension: 46.5mm x 27mm x 14.4mm (1.83\" x 1.06\" x .56\")\u003c\/li\u003e\n\u003cli\u003eWeight: 16.8g (.59 oz)\u003c\/li\u003e\n\u003cli\u003eOperating Voltage Range: 4V-10.0V\u003c\/li\u003e\n\u003cli\u003eOperating Current: 100mA@5V \u003c\/li\u003e\n\u003cli\u003eOperating Range: \u0026gt;1.5km (Full Range)\u003c\/li\u003e\n\u003cli\u003eRSSI output: analog voltage output (0~3.3V)\u003c\/li\u003e\n\u003cli\u003eFirmware Upgradeable (FrSKY programmer required)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eAll 16 channels requires the FrSky Taranis, or the XJT module.\u003cbr\u003eFor 8 channels in D8 Mode you can use the FrSky Taranis or XJT, DJT, DFT, DHT and DHT-U modules. \u003cstrong\u003e(all non LBT) All receivers we supply are FCC NOT EU.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote that this receiver will be flashed with V2.1 firmware. which is not compatible with Frsky radios that are not the 2019 ACCESS versions unless both the radio and firmware is updated to V2 firmware or you are using a multi protocol module.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTo use radios that are previous versions you will need to downgrade the firmware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/youtu.be\/TuZBK6AGda0\"\u003e Video showing how to flash it. \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/X8R_FCC_180322-ee126b3f-e4f8-4585-836d-b3d6d992d5df.frk?v=1639451029\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003eFirmware available here\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2017\/07\/Manual\/X8R.pdf\" title=\"FrSKY X8R user manual\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eDownload the Manual here.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Frsky","offers":[{"title":"Default Title","offer_id":639611541,"sku":"03022408","price":65.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/05_1__1_631fed09-b5b8-4033-920e-3c9999ed2bfa.jpg?v=1734066878"},{"product_id":"frsky-xmr-p-2-4ghz-16ch-sbus-receiver","title":"FrSKY XM+ 2.4ghz 16ch SBUS Receiver ACCST","description":"\u003cp\u003eThis tiny 2.4GHz diversity receiver, weighing in at under 2g is perfect for those racers who are looking to lower their AUW. These are classed as full range, so identical to your X4R, XSR and D4R setups. Please note as they don't have an S.Port (only SBUS for control signals) they can't be used for telemetry setups.\u003cbr\u003eA full range receiver at only 1.6g this will be a very popular receiver in racing drones.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications;\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatibility:\u003cspan style=\"font-size: 15px;\"\u003e FrSky Taranis X9D\/X9D Plus\/X9E\/Horus X12S\/XJT D16 mode\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimension: 21.5*12*3.5mm(L x W x H)\u003c\/li\u003e\n\u003cli\u003eWeight: 1.6g\u003c\/li\u003e\n\u003cli\u003eOperating Range: Full range\u003c\/li\u003e\n\u003cli\u003eOperating Voltage Range : 3.7V~10V\u003c\/li\u003e\n\u003cli\u003eOperating Current : 30mA@5V\u003c\/li\u003e\n\u003cli\u003eNumber of Channels\u003c\/li\u003e\n\u003cli\u003eUp to 16CH from SBUS(CH1~CH15 for PWM,CH16 RSSI for FC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eManual available for \u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.frsky-rc.com\/download\/down.php?id=317\" target=\"_blank\"\u003edownload here\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Frsky","offers":[{"title":"Default","offer_id":30441540036,"sku":"03022418","price":31.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/xmr-p_acaf82f7-f354-45fc-b3a8-29b80c69b911.jpg?v=1726643207"},{"product_id":"frsky-r-xsr","title":"FrSKY R-XSR 2.4GHz 16CH ACCST Micro Receiver w\/ S-Bus \u0026 CPPM","description":"\u003ch3 style=\"text-align: center;\"\u003eFrSKY R-XSR 2.4GHz 16CH ACCST Micro Receiver w\/ S-Bus \u0026amp; CPPM\u003c\/h3\u003e\n\u003cp\u003eThe FrSky ultra mini receiver R-XSR is the evolution of the popular full range XSR receiver.\u003c\/p\u003e\n\u003cp\u003eThe R-XSR is a standalone receiver with all the functionality of the full-size XSR (including telemetry) but at 1\/3 size and weight of XSR receiver. The R-XSR also has an integrated diversity with 2x antennas for a solid RC link, and the IPEX connector makes it convenient to replace antennas.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures;\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltra mini size and lightweight\u003c\/li\u003e\n\u003cli\u003eSupport telemetry and Smart Port enabled\u003c\/li\u003e\n\u003cli\u003eFull range\u003c\/li\u003e\n\u003cli\u003eSwitchable SBUS\/ CPPM signal output\u003c\/li\u003e\n\u003cli\u003eSupports redundancy function\u003c\/li\u003e\n\u003cli\u003eIPEX connector, replaceable antennas\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications;\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimension: 16*11*5.4mm (L*W*H)\u003c\/li\u003e\n\u003cli\u003eWeight: 1.5g\u003c\/li\u003e\n\u003cli\u003eNumber of channels: 16CH (1-16CH from SBUS channel, 1~8CH from CPPM channel)\u003c\/li\u003e\n\u003cli\u003eOperating Voltage Range: 4~10V\u003c\/li\u003e\n\u003cli\u003eFirmware Upgradable\u003c\/li\u003e\n\u003cli\u003eCompatibility: FrSky X Series modules and radios in D16 mode - (not EU_LBT)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"text-align: center;\"\u003e\u003c\/h3\u003e\n\u003ch3 style=\"text-align: center;\"\u003eFrSKY R-XSR 2.4GHz 16CH ACCST Micro Receiver w\/ S-Bus \u0026amp; CPPM\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eNote that this receiver will be flashed with V2.1 firmware. which is not compatible with Frsky radios that are not the 2019 ACCESS versions.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTo use radios that are previous versions you will need to downgrade the firmware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/youtu.be\/ZSAVfwW8FoI\"\u003e\u003cstrong\u003eVideo showing how to flash it. \u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/RXSR_FCC_ACCST_191112.frk?v=1654054480\"\u003e\u003cstrong\u003eFirmware available here\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.frsky-rc.com\/wp-content\/uploads\/Downloads\/Manual\/R-XSR\/R-XSR%20ACCST%20-Manual.pdf\" title=\"FrSKY X8R user manual\"\u003e\u003cspan\u003e\u003cstrong\u003eDownload the Manual here.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Frsky","offers":[{"title":"Default Title","offer_id":3075174563867,"sku":"03022441","price":44.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/ckAKoFTUSXYtETDyxDwg_R-XSR-1000_21ea4ee8-1cc5-4d03-a8e7-1dc174abeb85.jpg?v=1730067792"},{"product_id":"frsky-compact-xsr-sim-usb-dongle-for-frsky-transmitters","title":"FrSKY Compact XSR-SIM USB Dongle for FrSky Transmitters","description":"\u003cp\u003eThe FrSky Wireless USB Dongle For Simulator allows you to wirelessly connect your FrSky transmitter to computer to use a simulator. Just install the pre-loaded HID driver to your PC (Mac users will need to download the correct HID drivers). Then bind your transmitter to it, now you can move freely while using a simulator.\u003cbr\u003e\u003cbr\u003eFrSky Compact XSR-SIM USB Dongle supports most simulators which have no hardware encryption.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSPECIFICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 48.2*19.1*9.2mm (L*W*H)\u003c\/li\u003e\n\u003cli\u003eWeight: 6.2g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompact design\u003c\/li\u003e\n\u003cli\u003eLow power requirements: typically 55mA\u003c\/li\u003e\n\u003cli\u003eCompatible with FrSky transmitters and module systems (Mode D16)\u003c\/li\u003e\n\u003cli\u003eCompatible with popular simulators (DRL, LiftOff, Freerider, HotProps, etc.)\u003c\/li\u003e\n\u003cli\u003e8 proportional channel and 8 switch channel output (set on the transmitter side)\u003c\/li\u003e\n\u003cli\u003eFirmware upgradable (through the S.Port)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDED:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x XSR-SIM\u003c\/li\u003e\n\u003cli\u003e1 x Manual \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.frsky-rc.com\/xsr-sim\/\"\u003eFiles available for download here\u003c\/a\u003e\u003c\/p\u003e","brand":"Frsky","offers":[{"title":"Default Title","offer_id":12621353091106,"sku":"03022301","price":42.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/0N8b0IsIRRGV8QzOoJe3_xsr-sim_7d49e04c-ea08-4be6-b81d-ec7287468f32.jpg?v=1734066801"},{"product_id":"frsky-rx8r-pro-2-4g-accst-8-16ch-sbus-telemtry-receiver","title":"FRSKY RX8R PRO 2.4G ACCST 8\/16CH SBUS TELEMETRY RECEIVER","description":"\u003cp\u003eThe FrSky RX8R Pro is an upgraded version of X8R receiver, it has all the same features including redundancy. The new 'Pro' version has higher precision and lower latency. Its deviation of PWM is reduced to 0.5us, and the delay of PWM output is 9ms less than that of the X8R in high-speed mode. Another feature that is new with the RX8R Pro is the reduction of interference caused by the ignition process.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimension: 46.3mm*26.6mm*14.2mm (L*W*H)\u003c\/li\u003e\n\u003cli\u003eWeight: 14.8g\u003c\/li\u003e\n\u003cli\u003eNumbers of Channels: 16CH(1～8CH PWM or 9~16CH PWM from conventional channel outputs, 1~16CH from SBUS port)\u003c\/li\u003e\n\u003cli\u003eWith RSSI Output on Board: Analog DC 0~3.3V\u003c\/li\u003e\n\u003cli\u003eOperating Voltage Range: 3.5V~10V\u003c\/li\u003e\n\u003cli\u003eOperating Current: 100mA@5V\u003c\/li\u003e\n\u003cli\u003eOperating Range: full range (\u0026gt;1.5km)\u003c\/li\u003e\n\u003cli\u003eFirmware Upgradeable\u003c\/li\u003e\n\u003cli\u003eServo Frame Rate: 9ms (HS— High-Speed Mode)\/18ms (FS—Normal Speed Mode)\u003c\/li\u003e\n\u003cli\u003eCompatibility: FrSky transmitters\/transmitter modules in D8\/D16 mode\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStrong anti-interference performance in the ignition process\u003c\/li\u003e\n\u003cli\u003eHigher precision of PWM\u003c\/li\u003e\n\u003cli\u003eLower latency on the PWM output\u003c\/li\u003e\n\u003cli\u003eSupport redundancy function\u003c\/li\u003e\n\u003cli\u003eSmart Port enabled and support telemetry data transmission\u003c\/li\u003e\n\u003cli\u003eThe Redundancy Function\u003c\/li\u003e\n\u003cli\u003eFor the master and slave receivers, when the master receiver goes into failsafe, the output signal from the slave receiver will be used until the master receiver works again.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote that this receiver will be flashed with V2.1 firmware. which is not compatible with Frsky radios that are not the 2019 ACCESS versions.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTo use radios that are previous versions you will need to downgrade the firmware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/youtu.be\/TuZBK6AGda0\"\u003eVideo showing how to flash it. \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.frsky-rc.com\/wp-content\/uploads\/Downloads\/Firmware\/RX8R-PRO\/FW-RX8R-PRO_180601.zip\"\u003eFirmware available here\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eNote: When both the master and slave receivers go into failsafe, the failsafe signal from the master receiver will be output; The slave receiver should be in no telemetry mode.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x RX8R Pro Receiver\u003c\/li\u003e\n\u003cli\u003eManual\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Frsky","offers":[{"title":"Default Title","offer_id":31582322262086,"sku":"03021808","price":98.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/xMIpEqnTKmnK1xEqw2xG_rx8r-pro-side_92e78cb9-8c0b-4c15-a7ee-f063f5b1b530.jpg?v=1730067842"},{"product_id":"frsky-s-port-airlink-s-tool","title":"FRSKY S.PORT AIRLINK S TOOL","description":"\u003cp\u003eThe S.Port AirLink S is a connecting tool to help you program and flash firmware to devices such as the S6R\/S8R. It can be used by inserting into the USB port of a PC and connecting to the S.Port of the device. Or it can be used wirelessly through Bluetooth which allows wireless S6R\/S8R configuration and real time telemetry dashboard.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimension: 37.9×30.9×9.9mm（L×W×H）\u003c\/li\u003e\n\u003cli\u003eWeight:6g\u003c\/li\u003e\n\u003cli\u003eOperating Voltage Range: 4-15V\u003c\/li\u003e\n\u003cli\u003eOperating Current: 88mA@5V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConfigure the parameters of the device(S6R\/S8R) with PC software in USB mode.\u003c\/li\u003e\n\u003cli\u003eConfigure the parameters of the device(S6R\/S8R) with PC software in wireless mode.\u003c\/li\u003e\n\u003cli\u003eUpgrade S.Port devices, configure and monitor sensors in USB mode.\u003c\/li\u003e\n\u003cli\u003eMonitor the receiver\/sensor, configure sensors in wireless mode.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.frsky-rc.com\/s-port-airlink-s\/\"\u003eDownload FrSky S.Port AirLink S Relevant Files\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/H8deqv_uzKM\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Frsky","offers":[{"title":"Default","offer_id":39279608496198,"sku":"03071908","price":39.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/air-link-s-1000_e49b3cce-2586-4d1c-9753-e955dfe02e34.jpg?v=1734066846"},{"product_id":"frsky-fas100-adv-smart-port-and-fbus-100a-capable-current-sensor","title":"FrSky FAS100 ADV Smart Port and FBUS 100A Capable Current Sensor","description":"\u003c!--StartFragment--\u003e\u003cdiv style=\"text-align: start;\"\u003e\u003cdiv\u003e\n\u003cp\u003eFrSky FAS100 ADV Smart Port and FBUS 100A Capable Current Sensor\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFrSky ADVANCE (ADV) series has comprehensive sensor types and enhanced the performance and capability of the original sensor line, all ADV sensors fully support FBUS protocol and they are also S.Port compatible. With the FBUS protocol, the ADV sensors can be seamlessly paired with the FBUS capable receiver and further simplifying the builds setup.\u003c\/p\u003e\n\u003cp\u003eThe FAS100 ADV current sensor can be used to measure current (maximum 100A) and voltage (up to 14S) when connected between a battery and ESC.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/div\u003e\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\u003cdiv style=\"text-align: start;\"\u003e\u003cul\u003e\n\u003cli\u003eDimension: 65*23*18mm (L*W*H)\u003c\/li\u003e\n\u003cli\u003eWeight: 30g\u003c\/li\u003e\n\u003cli\u003eMeasurement Range: 0-100A\u003c\/li\u003e\n\u003cli\u003eCurrent Consumption: 16mA@5V\u003c\/li\u003e\n\u003cli\u003eMaximum Safe Current: 100A\u003c\/li\u003e\n\u003cli\u003eMaximum Battery Voltage: 14S\u003c\/li\u003e\n\u003cli\u003eCompatible: Receivers with FrSky Smart Port \u0026amp; FBUS function\u003c\/li\u003e\n\u003cli\u003eXT90 Anti-Spark Connector\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1x FrSky FAS100 ADV Sensor\u003c\/li\u003e\u003c\/ul\u003e\u003c!--EndFragment--\u003e\n\n\u003cbr\u003e","brand":"Frsky","offers":[{"title":"Default Title","offer_id":40059344224326,"sku":"3040613","price":56.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/fas100_adv_57bf32a9-8928-4914-964f-f05378d8936e.jpg?v=1730067889"},{"product_id":"frsky-vari-adv-variometer-sensor","title":"FrSky VARI ADV Variometer Sensor","description":"\u003c!--StartFragment--\u003e\u003cp\u003e\u003cb\u003eFrSky VARI ADV Variometer Sensor\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eFrSky ADVANCE (ADV) series has comprehensive sensor types and enhanced the performance and capability of the original sensor line, all ADV sensors fully support FBUS protocol and they are also S.Port compatible. With the FBUS protocol, the ADV sensors can be seamlessly paired with the FBUS capable receiver and further simplifying the builds setup.\u003c\/p\u003e\u003cp\u003eThe VARI ADV variometer sensor calculates the altitude from atmospheric pressure, and atmospheric pressure will get lower as you go up in altitude, with using this the sensor can measure the altitude up to 10000 meters with an accuracy tolerance of 0.1 meters. An exact measurement cannot be performed if atmospheric pressure changes in weather.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: Variometer Sensor\u003c\/li\u003e\n\u003cli\u003eDimensions: 40*21*6.5mm (L x W x H)\u003c\/li\u003e\n\u003cli\u003eWeight: 3.4g\u003c\/li\u003e\n\u003cli\u003eMeasures: -1800 ~ 10000m with 0.1m\u003c\/li\u003e\n\u003cli\u003eOperational Voltage: DC 4-10V\u003c\/li\u003e\n\u003cli\u003eOperational Current: 4mA\u003c\/li\u003e\n\u003cli\u003eUnits: Metric or British units\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e\u003cspan style=\"font-size: 12px;\"\u003e1x FrSky VARI ADV variometer sensor\u003c\/span\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c!--EndFragment--\u003e\n\n\u003cbr\u003e","brand":"Frsky","offers":[{"title":"Default Title","offer_id":40115318980678,"sku":"3042204","price":47.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/vari-adv-1_95678217-67b6-485d-9ece-ddb1c821f481.jpg?v=1730067808"},{"product_id":"frsky-2-4g-900m-tandem-dual-band-receiver-td-mx-receiver","title":"FrSky 2.4G 900M Tandem Dual-Band Receiver TD MX Receiver","description":"\u003cp\u003eThe Tandem dual-band receivers are unlike any other FrSky 2.4Ghz or 900Mhz receivers, they work simultaneously at both 900Mhz and 2.4Ghz frequencies. That means Tandem receivers provide not only the low latency signal and long range control, also benefits from enhanced level of high reliability and anti-interference performance.\u003c\/p\u003e\n\u003cp\u003eThe Tandem series receivers adopt the triple antenna design that provides multi-directional wide coverage for the remote signal. The 900Mhz antenna is a newly designed small form factor, but has the equivalent high-performance as with previous 900mhz antennas.\u003c\/p\u003e\n\u003cp\u003eTD MX offers 4 PWM channels on a small and lightweight board, and it also has multiple ports onboard like SBUS Out, S.Port and FBUS. With the FBUS protocol, the Tandem series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (Neuron ESC, Advance Sensors, etc.) as well as simplifying the builds setup. In addition, the data (Power \u0026amp; Signal related) under unusual status during the flight can be recorded by Tandem receivers through the built-in black-box function.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSimultaneous working dual-band TD mode\u003c\/li\u003e\n\u003cli\u003eTriple antenna design for multi-directional coverage\u003c\/li\u003e\n\u003cli\u003eBlack Box function\u003c\/li\u003e\n\u003cli\u003e4ms Race Mode with Telemetry\u003c\/li\u003e\n\u003cli\u003eLong control range\u003c\/li\u003e\n\u003cli\u003eOver-The-Air (OTA) FW update\u003c\/li\u003e\n\u003cli\u003e4 PWM channels\u003c\/li\u003e\n\u003cli\u003eS.Port (with the FBUS protocol)\u003c\/li\u003e\n\u003cli\u003eSBUS Out\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency: 2.4GHz \u0026amp; 900MHz\u003c\/li\u003e\n\u003cli\u003eDimension: 25*21*4mm (L*W*H)\u003c\/li\u003e\n\u003cli\u003eWeight: 7.1g\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 3.5-10V (Please ensure the supplied voltage exceed 3.5V during the use.)\u003c\/li\u003e\n\u003cli\u003eOperating Current: ≤185mA@5V\u003c\/li\u003e\n\u003cli\u003eCompatibility: Tandem series transmitter \u0026amp; TD protocol capable RF module\u003c\/li\u003e\n\u003cli\u003eTriple 2.4G\/900M Antenna\u003cbr\u003e– 2* External 2.4G antenna (IPEX1)\u003cbr\u003e– 1* Newly designed 900M antenna\u003cbr\u003eIt only matches with the Tandem series transmitters with dual-band transmitter module.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/media.horusrc.com\/wysiwyg\/Products\/TD-MX_.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e","brand":"Frsky","offers":[{"title":"Default Title","offer_id":40227914907718,"sku":"03022018","price":66.45,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/TD-MX_8f1cfc08-f038-4000-953b-1e3a3c479c7d.png?v=1734066859"},{"product_id":"frsky-2-4g-900m-tandem-dual-band-receiver-td-r10-receiver-with-10-channel-ports","title":"FrSky 2.4G 900M Tandem Dual-Band Receiver TD R10 Receiver with 10 Channel Ports","description":"\u003cp\u003eThe Tandem dual-band receivers are unlike any other FrSky 2.4Ghz or 900Mhz receivers, they work simultaneously at both 900Mhz and 2.4Ghz frequencies. That means Tandem receivers provide not only the low latency signal and long-range control, also benefits from the enhanced level of high reliability and anti-interference performance.\u003c\/p\u003e\n\u003cp\u003eThe Tandem series receivers adopt the triple antenna design that provides multi-directional wide coverage for the remote signal. The data (Power \u0026amp; Signal related) under unusual status during the flight can be recorded by Tandem receivers through a built-in black box module.\u003c\/p\u003e\n\u003cp\u003eThe configurable 10 channel ports are a big feature of TD R10, each channel port can be assigned as PWM, SBUS, FBUS, or S.Port. With the FBUS protocol, the Tandem series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (Neuron ESC, Advance Sensors, etc.) as well as simplifying the builds setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSimultaneous working dual-band TD mode\u003c\/li\u003e\n\u003cli\u003eTriple antenna design for multi-directional coverage\u003c\/li\u003e\n\u003cli\u003eBlack Box function\u003c\/li\u003e\n\u003cli\u003eBuilt-in voltage sensor\u003c\/li\u003e\n\u003cli\u003e4ms Race Mode with Telemetry\u003c\/li\u003e\n\u003cli\u003eLong control range (up to 50KM – 100KM)\u003c\/li\u003e\n\u003cli\u003eOver-The-Air (OTA) FW update\u003c\/li\u003e\n\u003cli\u003eSupply current range（every single port）\u003cbr\u003e◦ Instantaneous current:5A\u003cbr\u003e◦ Continuous current:3A\u003c\/li\u003e\n\u003cli\u003e10 Configurable Channel Ports\u003cbr\u003e◦ CP1: PWM \/ SBUS Out \/ FBUS \/ S.Port \/ SBUS In\u003cbr\u003e◦ CP2-10: PWM \/ SBUS Out \/ FBUS \/ S.Port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency: 2.4GHz \u0026amp; 900MHz\u003c\/li\u003e\n\u003cli\u003eDimension: 46.5*26.3*14.7mm (L*W*H)\u003c\/li\u003e\n\u003cli\u003eWeight: 16.6g\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 3.5-10v DC\u003c\/li\u003e\n\u003cli\u003eOperating Current: ≤180mA@5V\u003c\/li\u003e\n\u003cli\u003eCompatibility: Tandem series transmitter \u0026amp; TD protocol capable RF module\u003c\/li\u003e\n\u003cli\u003eTriple 2.4G\/900M Antenna\u003cbr\u003e◦ 2* External 2.4G antenna (IPEX1)\u003cbr\u003e◦ 1* External 900M antenna (IPEX1)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003c\/p\u003e","brand":"Frsky","offers":[{"title":"Default Title","offer_id":40227953803334,"sku":"03022021","price":109.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/TD-R10-1_d64dae6c-6021-4d8e-8efe-4e0ebbfa8511.jpg?v=1730067833"},{"product_id":"frsky-2-4g-900m-tandem-dual-band-receiver-td-r18-receiver-with-18ch-ports","title":"FrSky 2.4G 900M Tandem Dual-Band Receiver TD R18 Receiver with 18CH Ports","description":"\u003cp\u003eThe Tandem dual-band receivers are unlike any other FrSky 2.4Ghz or 900Mhz receivers, they work simultaneously at both 900Mhz and 2.4Ghz frequencies. That means Tandem receivers provide not only the low latency signal and long range control, also benefits from enhanced level of high reliability and anti-interference performance.\u003c\/p\u003e\n\u003cp\u003eThe Tandem series receivers adopt the triple antenna design that provides multi-directional wide coverage for the remote signal. The 900Mhz antenna is a newly designed small form factor, but has the equivalent high-performance as with previous 900mhz antennas.\u003c\/p\u003e\n\u003cp\u003eThe data (Power \u0026amp; Signal related) under unusual status during the flight can be recorded by Tandem receivers through a built-in black box module, and TD R18 can additionally save the complete and long-term data (Control \u0026amp; Flight Attitude data log, etc.) by SD card through the external module. TD R18 also provides a socket that can be used to connect the switch panel\/NFC Switch panel to enable the built-in Power Switch function.\u003c\/p\u003e\n\u003cp\u003eThe configurable 18 channel ports are a big feature of TD R18, each channel port can be assigned as PWM, SBUS, FBUS, or S.Port. With the FBUS protocol, the Tandem series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (Neuron ESC, Advance Sensors, etc.) as well as simplifying the builds setup.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/media.horusrc.com\/wysiwyg\/Products\/TDR18_.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSimultaneous working dual-band TD mode\u003c\/li\u003e\n\u003cli\u003eTriple antenna design for multi-directional coverage\u003c\/li\u003e\n\u003cli\u003eBlack Box function\u003c\/li\u003e\n\u003cli\u003eBuilt-in Power Switch\u003c\/li\u003e\n\u003cli\u003eBuilt-in current and voltage sensors\u003c\/li\u003e\n\u003cli\u003e4ms Race Mode with Telemetry\u003c\/li\u003e\n\u003cli\u003eLong control range (up to 50KM – 100KM)\u003c\/li\u003e\n\u003cli\u003eOver-The-Air (OTA) FW update\u003c\/li\u003e\n\u003cli\u003e18 Configurable Channel Ports\u003cbr\u003e– CP1: PWM \/ SBUS Out \/ FBUS \/ S.Port \/ SBUS In (Redundancy Func.)\u003cbr\u003e– CP2-18: PWM \/ SBUS Out \/ FBUS \/ S.Port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency: 2.4GHz \u0026amp; 900MHz\u003c\/li\u003e\n\u003cli\u003eDimension: 53*40*16mm (L*W*H)\u003c\/li\u003e\n\u003cli\u003eWeight: 28.9g\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 4-10v\u003c\/li\u003e\n\u003cli\u003eOperating Current: ≤185mA@5V\u003c\/li\u003e\n\u003cli\u003eContinuous Current: ≤30A (power the device)\u003cbr\u003eInstantaneous Current: ≤60A (power the device)\u003c\/li\u003e\n\u003cli\u003eCompatibility: Tandem series radio \u0026amp; TD protocol capable RF module\u003c\/li\u003e\n\u003cli\u003eDual XT30 Power Input Connector\u003c\/li\u003e\n\u003cli\u003eTriple 2.4G\/900M Antenna\u003cbr\u003e– 1* Interior 2.4G chip antenna\u003cbr\u003e– 1* External 2.4G antenna (IPEX1)\u003cbr\u003e– 1* Newly designed 900M antenna\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Frsky","offers":[{"title":"Default Title","offer_id":40227969925190,"sku":"03022020","price":183.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/TD-R18-3_7ab8a7fe-044f-4d4a-9414-5080e1099675.jpg?v=1734066861"},{"product_id":"frsky-2-4g-900m-tandem-dual-band-receiver-td-r6-receiver-with-6-channel-ports","title":"FrSky 2.4G 900M Tandem Dual-Band Receiver TD R6 Receiver with 6 Channel Ports","description":"\u003cp\u003eThe Tandem dual-band receivers are unlike any other FrSky 2.4Ghz or 900Mhz receivers, they work simultaneously at both 2.4Ghz and 900Mhz frequencies. That means Tandem receivers provide not only the low latency signal and long-range control but also benefit from the enhanced level of high reliability and anti-interference performance.\u003c\/p\u003e\n\u003cp\u003eThe Tandem series receivers adopt a dual-band antenna design (2.4GHz \u0026amp; 900MHz) that provides multi-directional wide coverage for the remote signal. The telemetry data (Power \u0026amp; Signal related) can be recorded using the built-in black box module within the Tandem receiver, useful for capturing data from any unusual status during the flight.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2022\/08\/R6.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003eTD R6 receiver offers 6 PWM channel outputs and is bundled in a compact lightweight design, the receiver also provides two 3-pin ports accordingly for SBUS Out and FBUS\/S.Port. By setting the S.Port to the FBUS protocol, the TD receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (Neuron ESC, Advance Sensors, etc.) as well as simplifying the build setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSimultaneous working 2.4G\u0026amp;900M dual-band TD mode\u003c\/li\u003e\n\u003cli\u003eDual-band antenna design for multi-directional coverage\u003c\/li\u003e\n\u003cli\u003eCompact lightweight design\u003c\/li\u003e\n\u003cli\u003eBlack Box function\u003c\/li\u003e\n\u003cli\u003e4ms race mode with telemetry\u003c\/li\u003e\n\u003cli\u003eLong control range (up to 50KM – 100KM)\u003c\/li\u003e\n\u003cli\u003eOver-The-Air (OTA) FW update\u003c\/li\u003e\n\u003cli\u003e6 PWM channel ports\u003c\/li\u003e\n\u003cli\u003eFBUS \/ S.Port\u003c\/li\u003e\n\u003cli\u003eSBUS Out (Supports 16CH \/ 24CH mode)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency: 2.4GHz \u0026amp; 900MHz\u003c\/li\u003e\n\u003cli\u003eDimension: 47.5*20.4*10.9mm (L*W*H)\u003c\/li\u003e\n\u003cli\u003eWeight: 11.5g\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 3.5-10V(recommend 3.7-8.4V)\u003c\/li\u003e\n\u003cli\u003eOperating Current: ≤110mA@5V\u003c\/li\u003e\n\u003cli\u003eCompatibility: TANDEM series radio \u0026amp; RF module in TD mode.\u003c\/li\u003e\n\u003cli\u003e2.4G\/900M antenna connector: IPEX1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Frsky","offers":[{"title":"Default Title","offer_id":40380543664198,"sku":"03022022","price":74.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/td-r6-5_ab1e40a3-1c73-41ab-a1c9-d5d14e170a00.jpg?v=1734066940"},{"product_id":"frsky-archer-plus-r6-receiver-6-high-precision-pwm-channel-receivers","title":"FrSky ARCHER PLUS R6 Receiver 6 high-precision PWM channels with both ACCESS \u0026 ACCST D16 modes","description":"\u003ch3\u003eFrSky Archer Plus R6 Receiver\u003c\/h3\u003e\n\u003cp\u003eThe Archer line of receivers has been enhanced further with the addition of the new Archer Plus Series.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/media.horusrc.com\/wysiwyg\/Products\/Archere_Plus_R6_Dimension.jpg\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe Archer Plus Series receivers include some new features. Firstly an enhanced anti-RF-Interference capability can offer a more solid RF performance, and this is in addition to the receivers with anti-interfere performance in the spark ignition process. These Plus series receivers are also with both ACCESS and ACCST D16 modes, where the RF protocol is smart matched during the binding process on the radio. With the Black-Box function, some basic flight data (like Power \u0026amp; Signal related) can be well preserved.\u003c\/p\u003e\n\u003cp\u003eThe Archer Plus R6 6 high-precision PWM channel receivers are ideal for any type of glider pilot, it supports full-range signal strength with dual detachable antennas and guarantees optimal antenna reception and range. The R6 can be used as a Primary receiver in a redundant solution by wiring the SBUS In port and connecting to any other FrSky receiver equipped with an SBUS Out port. With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (XACT servos, ADV Sensors, etc.) as well as simplifying the builds setup.\u003c\/p\u003e\n\u003cp\u003e(\u003cstrong\u003e*\u003c\/strong\u003e\u003cem\u003eSome features require the support of ACCESS and ETHOS.\u003c\/em\u003e)\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eEnhanced Anti RF-Interference capability with more solid RF performance\u003c\/li\u003e\n\u003cli\u003eSmart-matched ACCESS \u0026amp; ACCST D16 modes\u003c\/li\u003e\n\u003cli\u003eSupports basic Black-Box function\u003c\/li\u003e\n\u003cli\u003e6 high-precision PWM channel ports\u003c\/li\u003e\n\u003cli\u003eSBUS Out port Supports 16ＣＨ／24CH mode）\u003c\/li\u003e\n\u003cli\u003eSupports signal redundancy (SBUS In)\u003c\/li\u003e\n\u003cli\u003eFull control range with telemetry (S.Port or FBUS)\u003c\/li\u003e\n\u003cli\u003eOver-The-Air (OTA) FW update\u003c\/li\u003e\n\u003cli\u003eExternal battery\/device voltage detection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDimension: 33*15*9.7mm (L*W*H)\u003c\/li\u003e\n\u003cli\u003eWeight:5g\u003c\/li\u003e\n\u003cli\u003eNumber of Channels: 6\/24 channels\u003cbr\u003e6 High-precision PWM \u0026amp; 16 SBUS channels Mode\u003cbr\u003e6 High-precision PWM \u0026amp; 24 SBUS channels Mode\u003c\/li\u003e\n\u003cli\u003eOperating Voltage Range: 5 -10V\u003c\/li\u003e\n\u003cli\u003eOperating Current: ＜65mA@5V\u003c\/li\u003e\n\u003cli\u003eOperating Range: ＞2km (Full range)(*Range may vary based on local conditions.)\u003c\/li\u003e\n\u003cli\u003eVoltage Measurement Range via AIN2 (External device): 0-35V (Battery Voltage Divider Ratio: 1:10)\u003c\/li\u003e\n\u003cli\u003eAntenna connector: IPEX4\u003c\/li\u003e\n\u003cli\u003eCompatibility: FrSky 2.4GHz ACCESS \/ ACCST D16 capable transmitters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePackaged Includes\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFrSky Archer Plus R6 Receiver*1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FrSky","offers":[{"title":"Default Title","offer_id":40564379844678,"sku":"3020115","price":66.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/3_3_1_ef3b636b-ef4c-4ff0-a030-14856ef471c8.jpg?v=1734066871"},{"product_id":"frsky-tw-r8-dual-2-4g-receiver-with-8ch-ports","title":"FrSky TW R8 Dual 2.4G Receiver with 8CH Ports","description":"\u003cp\u003eTWIN series TW R8 receiver features a new stable TW protocol that benefits from simultaneously integrating dual active 2.4G frequency bands. The TW active-active protocol is different from the general active-standby redundancy solutions (where one receiver takes over signal control only when the other is in Failsafe mode), with the TW protocol, dual 2.4G frequency bands are active on the TW series receiver at the same time.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"alignnone size-full wp-image-14456\" src=\"https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/01\/TW-R8%E4%B8%AD%E8%8B%B1%E6%96%87%E7%BD%91%E7%AB%99%E9%80%9A%E7%94%A8.jpg\" alt=\"\" width=\"650\" height=\"200\" srcset=\"https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/01\/TW-R8中英文网站通用.jpg 650w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/01\/TW-R8中英文网站通用-300x92.jpg 300w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/01\/TW-R8中英文网站通用-150x46.jpg 150w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/01\/TW-R8中英文网站通用-600x185.jpg 600w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/01\/TW-R8中英文网站通用-350x108.jpg 350w\" sizes=\"(max-width: 650px) 100vw, 650px\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe TW R8 receiver is equipped with 2×2.4G antennas. The signal ports include both SBUS In \u0026amp; Out channel and 8 PWM output channel ports. It also supports telemetry functions through FBUS \/S.Port. By setting the TW R8 to use FBUS protocol in the ETHOS system, the signal control and telemetry can be connected to any device that supports FBUS protocol through only one line to achieve bidirectional transmission, also simplifying the model build using fewer wires.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSimultaneous working dual 2.4G TW mode\u003c\/li\u003e\n\u003cli\u003eBlack-Box function\u003c\/li\u003e\n\u003cli\u003eLong control range (Range varies based on the RF Power settings.)\u003c\/li\u003e\n\u003cli\u003eOver-The-Air (OTA) FW update\u003c\/li\u003e\n\u003cli\u003e8 PWM channel ports\u003c\/li\u003e\n\u003cli\u003eSBUS Out port (Supports 16CH \/ 24CH mode)\u003c\/li\u003e\n\u003cli\u003eSBUS In port (Supports Signal Redundancy)\u003c\/li\u003e\n\u003cli\u003eFBUS \/ S.Port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"color_font\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency: Dual 2.4GHz\u003c\/li\u003e\n\u003cli\u003eDimension: 54*20*10mm (L*W*H)\u003c\/li\u003e\n\u003cli\u003eWeight: 9.8g\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 3.5-10V (Please ensure the supplied voltage exceeds 2.8V during the use.)\u003c\/li\u003e\n\u003cli\u003eOperating Current: 80mA@5V\u003c\/li\u003e\n\u003cli\u003eVoltage Measurement Range via AIN2 (External device): 0-36V\u003c\/li\u003e\n\u003cli\u003eAntenna Connector: IPEX4\u003c\/li\u003e\n\u003cli\u003eCompatibility: TWIN series Radio \u0026amp; RF module in TW mode.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e:\u003cbr\u003e1x FrSky TW R8 Dual 2.4G Receiver\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.frsky-rc.com\/tw-r8-tw-gr8\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDownload Manual and Firmware\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"color_font\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Frsky","offers":[{"title":"Default Title","offer_id":40587108384838,"sku":"03022027","price":83.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/tw_r8_new_7ae13bdc-cd98-4580-9cea-9b94a10597de.jpg?v=1730067853"},{"product_id":"frsky-archer-plus-r10-receiver-with-both-access-accst-d16-modes","title":"FrSky ARCHER PLUS R10+ receiver with both ACCESS \u0026 ACCST D16 modes","description":"\u003cp\u003e\u003cstrong\u003eFrSky Archer R10 Plus\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Archer line of receivers has been enhanced further with the addition of the new Archer Plus Series.\u003c\/p\u003e\n\u003cp\u003eThe Archer Plus Series receivers include some new features. Firstly an enhanced anti-RF-Interference capability can offer a more solid RF performance, and this is in addition to existing anti-interfere performance in the spark ignition process. These Plus series receivers are also with both ACCESS and ACCST D16 modes, where the RF protocol is smart matched during the binding process on the radio. With the Black-Box function ready, some basic flight data (like Power \u0026amp; Signal related) can be well preserved.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/media.horusrc.com\/wysiwyg\/Products\/R10_.jpg\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe R10+ receivers have 10 configurable channel ports, each channel port can be assigned as PWM, SBUS, FBUS, or S.Port. The R10+ can be used as a Primary receiver in a redundant solution by setting a port as SBUS In and connecting to any other FrSky receiver equipped with an SBUS Out port. With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (XACT servos, ADV Sensors, etc.) as well as simplifying the builds setup. This receiver also supports full-range signal strength with dual detachable antennas and guarantees optimal antenna reception and range.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"color_font\"\u003e● Enhanced Anti RF-Interference capability with more solid RF performance\u003cbr\u003e● Smart-matched ACCESS \u0026amp; ACCST D16 modes\u003cbr\u003e● Supports basic Black-Box function (Available later by updating the FW.)\u003cbr\u003e● 10 configurable channel ports (PWM, SBUS, FBUS, or S.Port)\u003c\/span\u003e\u003cbr\u003e(Note: In ACCST mode, SBUS Out is assigned on Pin9 \u0026amp; S.Port is on Pin10.)\u003cbr\u003e● Supports signal redundancy (SBUS In)\u003cbr\u003e● Full control range with telemetry (S.Port or FBUS)\u003cbr\u003e● Anti-interference capability in the spark-ignition process\u003cbr\u003e● Over-The-Air (OTA) FW update\u003cbr\u003e● External battery\/device voltage detection\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"color_font\"\u003e●Dimension: 46.5*26.3*14.7mm (L*W*H)\u003cbr\u003e●Weight: 13g\u003cbr\u003e●10 Configurable Channel Ports\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan class=\"color_font\"\u003eCP1: PWM \/ SBUS Out \/ FBUS \/ S.Port \/ SBUS In\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"color_font\"\u003eCP2-10: PWM \/ SBUS Out \/ FBUS \/ S.Port\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"color_font\"\u003e●SBUS Out (Supports 16CH \/ 24CH mode)\u003cbr\u003e●Operating Voltage Range: 3.5 -10V\u003cbr\u003e●Operating Current: ＜100mA@5V\u003cbr\u003e●Control Range: Full range* with telemetry\u003cbr\u003e(*Full Range: ＞2km, the range may vary based on local conditions.)\u003cbr\u003e●Voltage Measurement Range via AIN2 (External device): 0-35V\u003cbr\u003e(Battery Voltage Divider Ratio: 1:10)\u003cbr\u003e●Compatibility: FrSky 2.4GHz ACCESS \/ ACCST D16 capable transmitters\u003c\/span\u003e\u003c\/p\u003e","brand":"Frsky","offers":[{"title":"Default Title","offer_id":40610859319366,"sku":"03020110","price":85.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/1_4_2_a47583ab-cd67-4b63-b19b-5196657def55.jpg?v=1734066855"},{"product_id":"frsky-archer-plus-sr8-gyro-stabilized-receiver-with-both-access-accst-d16-modes","title":"FrSky ARCHER PLUS SR8-Gyro Stabilized Receiver with both ACCESS \u0026 ACCST D16 modes","description":"\u003cp\u003e\u003cstrong\u003eFrSky Archer Plus SR8\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Archer line of receivers has been enhanced further with the addition of the new Archer Plus Series.\u003c\/p\u003e\n\u003cp\u003eThe Archer Plus Series receivers include some new features. Firstly an enhanced anti-RF-Interference capability can offer a more solid RF performance, and this is in addition to the receivers with anti-interfere performance in the spark ignition process. These Plus series receivers are also with both ACCESS and ACCST D16 modes, where the RF protocol is smart matched during the binding process on the radio. With the Black-Box function, some basic flight data (like Power \u0026amp; Signal related) can be well preserved.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"alignnone size-full wp-image-14486\" src=\"https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/05\/ARCHER-PLUS-SR8%E4%B8%AD%E8%8B%B1%E6%96%87%E7%BD%91%E7%AB%99%E9%80%9A%E7%94%A8.jpg\" sizes=\"(max-width: 650px) 100vw, 650px\" srcset=\"https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/05\/ARCHER-PLUS-SR8中英文网站通用.jpg 650w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/05\/ARCHER-PLUS-SR8中英文网站通用-300x92.jpg 300w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/05\/ARCHER-PLUS-SR8中英文网站通用-150x46.jpg 150w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/05\/ARCHER-PLUS-SR8中英文网站通用-600x185.jpg 600w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/05\/ARCHER-PLUS-SR8中英文网站通用-350x108.jpg 350w\" alt=\"\" width=\"650\" height=\"200\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe Archer Plus SR8 are gyro-stabilized receivers with a built-in 3-axis gyroscope and 3-axis accelerometer and feature multiple flight modes (Auto-level, Stabilization, Knife-Edge, etc.) and configuration methods. supports full-range signal strength with dual detachable antennas and guarantees optimal antenna reception and range. The Archer Plus SR8 can be used as a Primary receiver in a redundant solution by wiring the SBUS In port and connecting to any other FrSky receiver equipped with an SBUS Out port. With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (XACT servos, ADV Sensors, etc.) as well as simplifying the builds setup.\u003c\/p\u003e\n\u003cp\u003e(*Some features require the support of ACCESS and ETHOS.)\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnhanced Anti RF-Interference capability with more solid RF performance\u003c\/li\u003e\n\u003cli\u003eSmart-matched ACCESS \u0026amp; ACCST D16 modes\u003c\/li\u003e\n\u003cli\u003eSupports basic Black-Box function\u003c\/li\u003e\n\u003cli\u003eBuilt-in 3-axis gyroscope and 3-axis accelerometer sensor\u003c\/li\u003e\n\u003cli\u003eMultiple flight modes and configuration tools (ETHOS, LUA scripts, etc.)\u003c\/li\u003e\n\u003cli\u003eSBUS Out port (Supports 16CH \/ 24CH mode)\u003c\/li\u003e\n\u003cli\u003eSBUS In port (Supports Signal Redundancy)\u003c\/li\u003e\n\u003cli\u003eFull control range with telemetry (S.Port or FBUS)\u003c\/li\u003e\n\u003cli\u003eOver-The-Air (OTA) FW update\u003c\/li\u003e\n\u003cli\u003eExternal battery\/device voltage detection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDimension: 54*20*10mm (L*W*H)\u003c\/li\u003e\n\u003cli\u003eWeight: 9.8g\u003c\/li\u003e\n\u003cli\u003eNumber of Channels: 8\/24 channels\u003cbr\u003e-8 High-precision PWM \u0026amp; 16 SBUS channels Mode\u003cbr\u003e-8 High-precision PWM \u0026amp; 24 SBUS channels Mode\u003c\/li\u003e\n\u003cli\u003eOperating Voltage Range: 3.5 -10V\u003c\/li\u003e\n\u003cli\u003eOperating Current: ＜65mA@5V\u003c\/li\u003e\n\u003cli\u003eOperating Range: ＞2km (Full range) (*Range may vary based on local conditions.)\u003c\/li\u003e\n\u003cli\u003eVoltage Measurement Range via AIN2 (External device): 0-35V (Battery Voltage Divider Ratio: 1:10)\u003c\/li\u003e\n\u003cli\u003eAntenna connector: IPEX4\u003c\/li\u003e\n\u003cli\u003eCompatibility: FrSky 2.4GHz ACCESS \/ ACCST D16 capable transmitters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackaged Including\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1× FrSky Archer Plus SR8 \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FrSky","offers":[{"title":"Default Title","offer_id":40610867249222,"sku":"03020113","price":95.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/archer_plus_sr8_bef30eaa-ffce-4bd2-a8a3-5ef834aa4857.jpg?v=1734066885"},{"product_id":"frsky-archer-plus-sr10-receiver-with-access-accst-d16-modes","title":"FrSky ARCHER PLUS SR10+Gyro Stabilized Receiver with both ACCESS \u0026 ACCST D16 modes","description":"\u003cp\u003e\u003cstrong\u003eFrSky Archer SR10 Plus\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Archer line of receivers has been enhanced further with the addition of the new Archer Plus Series.\u003c\/p\u003e\n\u003cp\u003eThe Archer Plus Series receivers include some new features. Firstly an enhanced anti-RF-Interference capability can offer a more solid RF performance, and this is in addition to existing anti-interfere performance in the spark ignition process. These Plus series receivers are also with both ACCESS and ACCST D16 modes, where the RF protocol is smart matched during the binding process on the radio. With the Black-Box function ready, some basic flight data (like Power \u0026amp; Signal related) can be well preserved.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/media.horusrc.com\/wysiwyg\/Products\/SR10_.jpg\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe Archer Plus SR10+ are gyro-stabilized receivers with a built-in 3-axis gyroscope and 3-axis accelerometer and feature multiple flight modes (Auto-level, Stabilization, Knife-Edge, etc.) and configuration methods. The SR10+ receivers have 10 configurable channel ports, each channel port can be assigned as PWM, SBUS, FBUS, or S.Port.\u003c\/p\u003e\n\u003cp\u003eThe SR10+ supports full-range signal strength with dual detachable antennas and guarantees optimal antenna reception and range. The SR10+ can be used as a Primary receiver in a redundant solution by setting a port as SBUS In and connecting to any other FrSky receiver equipped with an SBUS Out port. With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (XACT servos, ADV Sensors, etc.) as well as simplifying the builds setup.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"color_font\"\u003e● Enhanced Anti RF-Interference capability with more solid RF performance\u003cbr\u003e● Smart-matched ACCESS \u0026amp; ACCST D16 modes\u003cbr\u003e● Supports basic Black-Box function (Available later by updating the FW.)\u003cbr\u003e● Built-in 3-axis gyroscope and 3-axis accelerometer sensor\u003cbr\u003e● Multiple flight modes and configuration tools (ETHOS, LUA scripts, etc.)\u003cbr\u003e● 10 configurable channel ports (PWM, SBUS, FBUS, or S.Port)\u003c\/span\u003e\u003cbr\u003e(Note: In ACCST mode, SBUS Out is assigned on Pin9 \u0026amp; S.Port is on Pin10.)\u003cbr\u003e● Supports signal redundancy (SBUS In)\u003cbr\u003e● Full control range with telemetry (S.Port or FBUS)\u003cbr\u003e● Anti-interference capability in the spark-ignition process\u003cbr\u003e● Over-The-Air (OTA) FW update\u003cbr\u003e● External battery\/device voltage detection\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"color_font\"\u003e●Dimension: 46.5*26.3*14.7mm (L*W*H)\u003cbr\u003e●Weight: 13g\u003cbr\u003e●10 Configurable Channel Ports\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan class=\"color_font\"\u003eCP1: PWM \/ SBUS Out \/ FBUS \/ S.Port \/ SBUS In\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"color_font\"\u003eCP2-10: PWM \/ SBUS Out \/ FBUS \/ S.Port\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"color_font\"\u003e●SBUS Out (Supports 16CH \/ 24CH mode)\u003cbr\u003e●Operating Voltage Range: 3.5 -10V\u003cbr\u003e●Operating Current: ＜100mA@5V\u003cbr\u003e●Control Range: Full range* with telemetry\u003cbr\u003e(*Full Range: ＞2km, the range may vary based on local conditions.)\u003cbr\u003e●Voltage Measurement Range via AIN2 (External device): 0-35V\u003cbr\u003e(Battery Voltage Divider Ratio: 1:10)\u003cbr\u003e●Compatibility: FrSky 2.4GHz ACCESS \/ ACCST D16 capable transmitters\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.frsky-rc.com\/wp-content\/uploads\/Downloads\/Amanual\/Archer%20SR10%20Plus%20Manual.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan class=\"color_font\"\u003eManual Available Here\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"FrSky","offers":[{"title":"Default Title","offer_id":40610877571142,"sku":"03020109","price":105.45,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/1_4_f6c8c570-0025-4fc9-839e-eb5f1235bd3f.jpg?v=1726643167"},{"product_id":"frsky-archer-plus-gr8-receiver-with-an-upgraded-high-precision-variometer-with-both-access-accst-d16-modes","title":"FrSky ARCHER PLUS GR8 Receiver with an upgraded high-precision variometer with both ACCESS \u0026 ACCST D16 modes","description":"\u003cp\u003e\u003cstrong\u003eFrSky Archer Plus GR8\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Archer line of receivers has been enhanced further with the addition of the new Archer Plus Series.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/media.horusrc.com\/wysiwyg\/Products\/Archere_Plus_GR8_Dimension.jpg\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe Archer Plus Series receivers include some new features. Firstly an enhanced anti-RF-Interference capability can offer a more solid RF performance, and this is in addition to the receivers with anti-interfere performance in the spark ignition process. These Plus series receivers are also with both ACCESS and ACCST D16 modes, where the RF protocol is smart matched during the binding process on the radio. With the Black-Box function, some basic flight data (like Power \u0026amp; Signal related) can be well preserved.\u003c\/p\u003e\n\u003cp\u003eThe Archer Plus GR8 8 high-precision PWM channel receivers support full-range signal strength with dual detachable antennas and guarantee optimal antenna reception and range. The GR8 can be used as a Primary receiver in a redundant solution by wiring the SBUS In port and connecting to any other FrSky receiver equipped with an SBUS Out port. With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (XACT servos, ADV Sensors, etc.) as well as simplifying the builds setup.\u003c\/p\u003e\n\u003cp\u003eThe Archer Plus GR8 are receivers with an upgraded high-precision variometer that gives pilots more accurate and quicker altitude and vertical speed data and also features its more accurate and quicker vario audio feedback from your FrSky ACCESS enabled transmitter.\u003c\/p\u003e\n\u003cp\u003e(\u003cstrong\u003e*\u003c\/strong\u003e\u003cem\u003eSome features require the support of ACCESS and ETHOS.\u003c\/em\u003e)\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eEnhanced Anti RF-Interference capability with more solid RF performance\u003c\/li\u003e\n\u003cli\u003eSmart-matched ACCESS \u0026amp; ACCST D16 modes\u003c\/li\u003e\n\u003cli\u003eSupports basic Black-Box function\u003c\/li\u003e\n\u003cli\u003eUpgraded variometer sensor\u003c\/li\u003e\n\u003cli\u003e8 high-precision PWM channel ports\u003c\/li\u003e\n\u003cli\u003eSBUS Out port（Supports 16ＣＨ／24CH mode）\u003c\/li\u003e\n\u003cli\u003eSupports signal redundancy (SBUS In)\u003c\/li\u003e\n\u003cli\u003eFull control range with telemetry (S.Port or FBUS)\u003c\/li\u003e\n\u003cli\u003eOver-The-Air (OTA) FW update\u003c\/li\u003e\n\u003cli\u003eExternal battery\/device voltage detection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDimension: 54*20*10mm (L*W*H)\u003c\/li\u003e\n\u003cli\u003eWeight: 9.8g\u003c\/li\u003e\n\u003cli\u003eNumber of Channels: 8\/24 channels\u003cbr\u003e8 High-precision PWM \u0026amp; 16 SBUS channels Mode\u003cbr\u003e8 High-precision PWM \u0026amp; 24 SBUS channels Mode\u003c\/li\u003e\n\u003cli\u003eOperating Voltage Range: 3.5 -10V\u003c\/li\u003e\n\u003cli\u003eOperating Current: ＜65mA@5V\u003c\/li\u003e\n\u003cli\u003eOperating Range: ＞2km (Full range)(*Range may vary based on local conditions.)\u003c\/li\u003e\n\u003cli\u003eVariometer Measurement Range\u003cbr\u003eAltimeter Range \u0026amp; Resolution: -700m to 10000m \u0026amp; 0.1m\u003cbr\u003eVertical Speed Range: ±10m\/s\u003c\/li\u003e\n\u003cli\u003eVoltage Measurement Range via AIN2 (External device): 0-35V (Battery Voltage Divider Ratio: 1:10)\u003c\/li\u003e\n\u003cli\u003eAntenna connector: IPEX4\u003c\/li\u003e\n\u003cli\u003eCompatibility: FrSky 2.4GHz ACCESS \/ ACCST D16 capable transmitters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePackaged Included:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFrSky Archer Plus GR8*1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FrSky","offers":[{"title":"Default Title","offer_id":40610879504454,"sku":"03020114","price":85.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/03020114_archer_plus_gr8-1_5976c3b1-9785-4578-aa7d-0f2a21210561.jpg?v=1730067838"},{"product_id":"frsky-archer-plus-r8-receiver-8-high-precision-pwm-channel-receivers-support-full-range-signal-strength-with-both-access-accst-d16-modes","title":"FrSky ARCHER PLUS R8 Receiver 8 high-precision PWM channels with both ACCESS \u0026 ACCST D16 modes","description":"\u003ch3\u003e\u003cstrong\u003eFrSky Archer Plus R8\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe Archer line of receivers has been enhanced further with the addition of the new Archer Plus Series.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/media.horusrc.com\/wysiwyg\/Products\/Archere_Plus_R8_Dimension.jpg\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe Archer Plus Series receivers include some new features. Firstly an enhanced anti-RF-Interference capability can offer a more solid RF performance, and this is in addition to the receivers with anti-interfere performance in the spark ignition process. These Plus series receivers are also with both ACCESS and ACCST D16 modes, where the RF protocol is smart matched during the binding process on the radio. With the Black-Box function, some basic flight data (like Power \u0026amp; Signal related) can be well preserved.\u003c\/p\u003e\n\u003cp\u003eThe Archer Plus R8 8 high-precision PWM channel receivers support full-range signal strength with dual detachable antennas and guarantee optimal antenna reception and range. The R8 can be used as a Primary receiver in a redundant solution by wiring the SBUS In port and connecting to any other FrSky receiver equipped with an SBUS Out port. With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (XACT servos, ADV Sensors, etc.) as well as simplifying the builds setup.\u003c\/p\u003e\n\u003cp\u003e(\u003cstrong\u003e*\u003c\/strong\u003e\u003cem\u003eSome features require the support of ACCESS and ETHOS.\u003c\/em\u003e)\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eEnhanced Anti RF-Interference capability with more solid RF performance\u003c\/li\u003e\n\u003cli\u003eSmart-matched ACCESS \u0026amp; ACCST D16 modes\u003c\/li\u003e\n\u003cli\u003eSupports basic Black-Box function\u003c\/li\u003e\n\u003cli\u003e8 high-precision PWM channel ports\u003c\/li\u003e\n\u003cli\u003eSBUS Out port（Supports 16ＣＨ／24CH mode）\u003c\/li\u003e\n\u003cli\u003eSupports signal redundancy (SBUS In)\u003c\/li\u003e\n\u003cli\u003eFull control range with telemetry (S.Port or FBUS)\u003c\/li\u003e\n\u003cli\u003eOver-The-Air (OTA) FW update\u003c\/li\u003e\n\u003cli\u003eExternal battery\/device voltage detection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDimension: 54*20*10mm (L*W*H)\u003c\/li\u003e\n\u003cli\u003eWeight: 9.8g\u003c\/li\u003e\n\u003cli\u003eNumber of Channels: 8\/24 channels\u003cbr\u003e8 High-precision PWM \u0026amp; 16 SBUS channels Mode\u003cbr\u003e8 High-precision PWM \u0026amp; 24 SBUS channels Mode\u003c\/li\u003e\n\u003cli\u003eOperating Voltage Range: 3.5 -10V\u003c\/li\u003e\n\u003cli\u003eOperating Current: ＜65mA@5V\u003c\/li\u003e\n\u003cli\u003eOperating Range: ＞2km (Full range)(*Range may vary based on local conditions.)\u003c\/li\u003e\n\u003cli\u003eVoltage Measurement Range via AIN2 (External device): 0-35V (Battery Voltage Divider Ratio: 1:10)\u003c\/li\u003e\n\u003cli\u003eAntenna connector: IPEX4\u003c\/li\u003e\n\u003cli\u003eCompatibility: FrSky 2.4GHz ACCESS \/ ACCST D16 capable transmitters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFrSky Archer Plus R8*1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FrSky","offers":[{"title":"Default Title","offer_id":40610900770886,"sku":"03020112","price":76.45,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/03020112_archer_plus_r8-1_aee27bde-7d47-4504-b2cd-db1aca9efc2d.jpg?v=1734066889"},{"product_id":"frsky-archer-plus-gr6-receiver-smart-matched-access-accst-d16-modes","title":"FrSky ARCHER PLUS GR6 Receiver with an upgraded high-precision variometer with both ACCESS \u0026 ACCST D16 modes","description":"\u003ch3\u003eFrSky Archer Plus GR6 Receiver\u003c\/h3\u003e\n\u003cp\u003eThe Archer line of receivers has been enhanced further with the addition of the new Archer Plus Series.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"file:\/\/\/Z:\/%E5%B8%82%E5%9C%BA%E9%83%A8\/2023%20%E4%BA%A7%E5%93%81%E5%9B%BE%E7%89%87\/2.%20%E6%8E%A5%E6%94%B6%E6%9C%BA\/ACCESS%20ARCHER%20%E7%B3%BB%E5%88%97\/ARCHER%20PLUS%20GR6\" alt=\"\"\u003e\u003cimg src=\"https:\/\/media.horusrc.com\/wysiwyg\/Products\/ARCHER-PLUS-GR6__1.jpg\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe Archer Plus Series receivers include some new features. Firstly an enhanced anti-RF-Interference capability can offer a more solid RF performance, and this is in addition to the receivers with anti-interfere performance in the spark ignition process. These Plus series receivers are also with both ACCESS and ACCST D16 modes, where the RF protocol is smart matched during the binding process on the radio. With the Black-Box function, some basic flight data (like Power \u0026amp; Signal related) can be well preserved.\u003c\/p\u003e\n\u003cp\u003eThe Archer Plus GR6 6 high-precision PWM channel receivers are ideal for any type of glider pilot, it supports full-range signal strength with dual detachable antennas and guarantees optimal antenna reception and range. The R6 \/GR6 can be used as a Primary receiver in a redundant solution by wiring the SBUS In port and connecting to any other FrSky receiver equipped with an SBUS Out port. With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (XACT servos, ADV Sensors, etc.) as well as simplifying the builds setup.\u003c\/p\u003e\n\u003cp\u003eThe Archer Plus GR6 are receivers with an upgraded high-precision variometer that gives pilots more accurate and quicker altitude and vertical speed data and also features its more accurate and quicker vario audio feedback from your FrSky ACCESS enabled transmitter.\u003c\/p\u003e\n\u003cp\u003e(\u003cstrong\u003e*\u003c\/strong\u003e\u003cem\u003eSome features require the support of ACCESS and ETHOS.\u003c\/em\u003e)\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eEnhanced Anti RF-Interference capability with more solid RF performance\u003c\/li\u003e\n\u003cli\u003eSmart-matched ACCESS \u0026amp; ACCST D16 modes\u003c\/li\u003e\n\u003cli\u003eSupports basic Black-Box function\u003c\/li\u003e\n\u003cli\u003eUpgraded variometer sensor\u003c\/li\u003e\n\u003cli\u003e6 high-precision PWM channel ports\u003c\/li\u003e\n\u003cli\u003eSBUS Out port（Supports 16ＣＨ／24CH mode）\u003c\/li\u003e\n\u003cli\u003eSBUS In port (Supports Signal Redundancy)\u003c\/li\u003e\n\u003cli\u003eFull control range with telemetry (S.Port or FBUS)\u003c\/li\u003e\n\u003cli\u003eOver-The-Air (OTA) FW update\u003c\/li\u003e\n\u003cli\u003eExternal battery\/device voltage detection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDimension: 33*15*9.7mm (L*W*H)\u003c\/li\u003e\n\u003cli\u003eWeight:4.3g\u003c\/li\u003e\n\u003cli\u003eNumber of Channels: 6\/24 channels\u003cbr\u003e6 High-precision PWM \u0026amp; 16 SBUS channels Mode\u003cbr\u003e6 High-precision PWM \u0026amp; 24 SBUS channels Mode\u003c\/li\u003e\n\u003cli\u003eOperating Voltage Range: 3.5-10V\u003c\/li\u003e\n\u003cli\u003eOperating Current: ＜65mA@5V\u003c\/li\u003e\n\u003cli\u003eOperating Range: ＞2km (Full range)(*Range may vary based on local conditions.)\u003c\/li\u003e\n\u003cli\u003eVariometer Measurement Range\u003cbr\u003eAltimeter Range \u0026amp; Resolution: -700m to 10000m \u0026amp; 0.1m\u003cbr\u003eVertical Speed Range: ±10m\/s\u003c\/li\u003e\n\u003cli\u003eVoltage Measurement Range via AIN2 (External device): 0-35V (Battery Voltage Divider Ratio: 1:10)\u003c\/li\u003e\n\u003cli\u003eAntenna connector: IPEX4\u003c\/li\u003e\n\u003cli\u003eCompatibility: FrSky 2.4GHz ACCESS \/ ACCST D16 capable transmitters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePackaged Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFrSky Archer Plus GR6 Receiver*1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FrSky","offers":[{"title":"Default Title","offer_id":40610900967494,"sku":"03020116","price":76.45,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/1_9_16_4c80514f-13a5-4894-ac67-acf0057c517b.jpg?v=1730067964"},{"product_id":"frsky-archer-plus-rs-mini-receiver-with-both-access-accst-d16-modes","title":"FrSky Archer Plus RS Mini Receiver with both ACCESS \u0026 ACCST D16 modes","description":"\u003cp\u003e\u003cstrong\u003eFrSky Archer Plus RS Mini\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Archer line of receivers has been enhanced further with the addition of the new Archer Plus Series.\u003c\/p\u003e\n\u003cp\u003eThe Archer Plus Series receivers include some new features. Firstly an enhanced anti-RF-Interference capability can offer a more solid RF performance, and this is in addition to existing anti-interfere performance in the spark ignition process. These Plus series receivers are also with both ACCESS and ACCST D16 modes, where the RF protocol is smartly matched during the binding process on the radio. In ACCESS mode, these receivers not only feature OTA wireless firmware upgrades, increased range, and telemetry performance, they support even more functions like configurable telemetry power (RS), S.Port \/ F.Port \/ FBUS switching, and VFR indicators.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"alignnone size-full wp-image-14470\" src=\"https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/04\/ARCHER-PLUS-RS-MINI%E4%B8%AD%E8%8B%B1%E6%96%87%E7%BD%91%E7%AB%99%E9%80%9A%E7%94%A8.jpg\" sizes=\"(max-width: 650px) 100vw, 650px\" srcset=\"https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/04\/ARCHER-PLUS-RS-MINI中英文网站通用.jpg 650w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/04\/ARCHER-PLUS-RS-MINI中英文网站通用-300x55.jpg 300w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/04\/ARCHER-PLUS-RS-MINI中英文网站通用-150x28.jpg 150w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/04\/ARCHER-PLUS-RS-MINI中英文网站通用-600x111.jpg 600w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/04\/ARCHER-PLUS-RS-MINI中英文网站通用-350x65.jpg 350w\" alt=\"\" width=\"650\" height=\"120\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe RS Mini version provides the optimal model-building solution that uses an onboard PCB-type antenna to reduce the building hassle of using the traditional ones and removes the soldering problems by adding a wire connector to lead the external device more easily.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTiny and super lightweight\u003c\/li\u003e\n\u003cli\u003eS.Port \/ F.Port \/ FBUS (Configurable via S.Port)\u003c\/li\u003e\n\u003cli\u003eOver-The-Air (OTA) FW update\u003c\/li\u003e\n\u003cli\u003eSBUS Out port (Supports 16CH \/ 24CH mode)\u003c\/li\u003e\n\u003cli\u003eOnboard PCB-type antenna\u003c\/li\u003e\n\u003cli\u003eEasily plug wire connector without soldering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDimension: 16*11mm (L*W)\u003c\/li\u003e\n\u003cli\u003eWeight: 1.3g\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 3.5-10V\u003c\/li\u003e\n\u003cli\u003eOperating Current: 12mA@5V\u003c\/li\u003e\n\u003cli\u003eOnboard PCB-type antenna\u003c\/li\u003e\n\u003cli\u003eControl Range: ≥600m (*The control range may vary based on local conditions.)\u003c\/li\u003e\n\u003cli\u003eCompatibility: All FrSky ACCESS\/ACCST D16 transmitters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackaged Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eFrSky Archer Plus RS Mini*1\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FrSky","offers":[{"title":"Default Title","offer_id":40610902016070,"sku":"03020111","price":30.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/03020111_archer_plus_rs_mini-3_69f4692d-e03a-4ec7-b9b3-cb2249961561.jpg?v=1730067797"},{"product_id":"frsky-archer-plus-rs-supports-full-range-signal-control-with-an-equivalent-telemetry-range","title":"FrSky ARCHER Plus RS with both ACCESS \u0026 ACCST D16 modes","description":"\u003cp\u003e\u003cstrong\u003eFrSky Archer Plus RS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Archer line of receivers has been enhanced further with the addition of the new Archer Plus Series.\u003c\/p\u003e\n\u003cp\u003eThe Archer Plus Series receivers include some new features. Firstly an enhanced anti-RF-Interference capability can offer a more solid and stable RF performance, and this is in addition to existing anti-interfere performance in the spark ignition process. These Plus series receivers are also with both ACCESS and ACCST D16 modes, where the RF protocol is smartly matched during the binding process on the radio. In ACCESS mode, these receivers not only feature OTA wireless firmware upgrades, increased range, and telemetry performance, they support even more functions like configurable telemetry power (RS), S.Port \/ F.Port \/ FBUS switching, and VFR indicators.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"alignnone size-full wp-image-14473\" src=\"https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/05\/ARCHER-PLUS-RS%E4%B8%AD%E8%8B%B1%E6%96%87%E7%BD%91%E7%AB%99%E9%80%9A%E7%94%A8.jpg\" sizes=\"(max-width: 650px) 100vw, 650px\" srcset=\"https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/05\/ARCHER-PLUS-RS中英文网站通用.jpg 650w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/05\/ARCHER-PLUS-RS中英文网站通用-300x92.jpg 300w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/05\/ARCHER-PLUS-RS中英文网站通用-150x46.jpg 150w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/05\/ARCHER-PLUS-RS中英文网站通用-600x185.jpg 600w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/05\/ARCHER-PLUS-RS中英文网站通用-350x108.jpg 350w\" alt=\"\" width=\"650\" height=\"200\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe RS supports full-range signal control with an equivalent telemetry range. Dual detachable\/replaceable antennas assure optimal antenna reception and maximum range with their lightweight design thanks to the extremely tiny form factor. Features an inverted S.Port that allows for easily connecting flight controllers, in addition to all this, the RS can also be used as a redundancy receiver along with any other FrSky ACCESS capable receiver equipped with an SBUS port. The best available signal will be used to ensure superior connectivity.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTiny and super lightweight\u003c\/li\u003e\n\u003cli\u003eS.Port \/ F.Port \/ FBUS (Configurable via S.Port)\u003c\/li\u003e\n\u003cli\u003eOver-The-Air (OTA) FW update\u003c\/li\u003e\n\u003cli\u003eSBUS Out port (Supports 16CH \/ 24CH mode)\u003c\/li\u003e\n\u003cli\u003eSBUS In port (Supports Signal Redundancy)\u003c\/li\u003e\n\u003cli\u003eInverted S.Port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDimension: 16*11mm (L*W)\u003c\/li\u003e\n\u003cli\u003eWeight: 1.3g\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 3.5-10V\u003c\/li\u003e\n\u003cli\u003eOperating Current: 60mA@5V\u003c\/li\u003e\n\u003cli\u003eAntenna Connector: IPEX4\u003c\/li\u003e\n\u003cli\u003eControl Range: Full range* with telemetry\u003cbr\u003e(* Full Range: ≥2km, the control range may vary based on local conditions.)\u003c\/li\u003e\n\u003cli\u003eCompatibility: All FrSky ACCESS\/ACCST D16 transmitters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackaged Including\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1× FrSky Archer Plus RS \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FrSky","offers":[{"title":"Default Title","offer_id":40610907357254,"sku":"03020117","price":44.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/1_9_17_65a99334-5812-4cf5-8a60-8635f8d85852.jpg?v=1734066851"},{"product_id":"frsky-2-4g-900m-tandem-dual-band-receiver-td-sr12-stabilized-receiver-with-12-channel-ports","title":"FrSky 2.4G 900M Tandem Dual-Band Receiver TD SR12 Stabilized Receiver with 12 Channel Ports","description":"\u003cp\u003eThe Tandem (TD) dual-band receivers are unlike any other FrSky 2.4Ghz or 900Mhz receivers, they work simultaneously at both 900Mhz and 2.4Ghz frequencies. That means TD receivers provide not only low latency signal and long-range control but also benefit from the enhanced level of high reliability and anti-interference performance.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/media.horusrc.com\/wysiwyg\/Products\/TD-SR12__1.jpg\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe TD SR12 receiver is equipped with a triple antenna (2×2.4G \u0026amp; 1×900M) design that provides multi-directional wide coverage for the remote signal and is designed for RC users who want to benefit from resilience and long-range in their radio communications.\u003c\/p\u003e\n\u003cp\u003eTD SR12 also provides a socket that can be used to connect the NFC Switch panel to enable the built-in Power Switch function. Dual-power provides a safe and efficient way to power the system with your power sources connected via a pair of standard XT30 connections. The dual-power consumption system is designed to operate in balance mode, where it consumes the power line from either power source depending on which has the higher voltage. With a built-in black box module, the data (Power \u0026amp; Signal related) under unusual status during the flight can be recorded by TD receivers.\u003c\/p\u003e\n\u003cp\u003eThe configurable 12-channel ports are a big feature of TD SR12, each channel port can be assigned as PWM, SBUS, FBUS, or S.Port. With the FBUS protocol, the Tandem series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (Neuron ESC, Advance Sensors, etc.) as well as simplifying the builds setup.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eADV Stabilizer\u003c\/strong\u003e\u003cbr\u003eThe TD SR12 offers an ADV Stabilizer function which is an upgrade over the original classical gyroscope stabilization modes. The ADV Stabilizer offers an advanced mode that provides more programmable stabilized channels and flexibility.\u003c\/p\u003e\n\u003cp\u003eThe classical stabilization mode has been enhanced with 5 additional stabilization channels, providing pin mapping to each channel in the multiple flight modes like Stabilization, Auto-Level, Hover, and Knife-Edge with an airplane model.\u003c\/p\u003e\n\u003cp\u003eIn the advanced stabilization mode, all the output pins are configurable for stabilization and additional advanced features such as Stab file sharing, programmable parameters, developer access, etc.\u003c\/p\u003e\n\u003cp\u003eThe advanced stabilizer feature incorporates high-precision telemetry sensors to monitor altitude, vertical speed, etc. This ADV feature is an additional benefit compared to using a regular S series stabilization receiver.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSimultaneous Working Dual-Band (900M\/2.4G) TD Mode\u003c\/li\u003e\n\u003cli\u003eDual Power Balancing Consumption\u003c\/li\u003e\n\u003cli\u003eBuilt-in Advanced Stabilization Functions\u003c\/li\u003e\n\u003cli\u003eBuilt-in High-Precision Telemetry Sensor (Altitude, Vertical Speed, etc.)\u003c\/li\u003e\n\u003cli\u003eBasic Black-Box Data Record Function\u003c\/li\u003e\n\u003cli\u003eBuilt-in Power Switch Function | Match with Different External Switches (Optional)\u003c\/li\u003e\n\u003cli\u003e4ms Race Mode with Telemetry\u003c\/li\u003e\n\u003cli\u003eLong Control Range (Range varies based on the RF Power settings.)\u003c\/li\u003e\n\u003cli\u003e12 Configurable Channel Ports\u003cbr\u003e– CP1: PWM \/ SBUS Out \/ FBUS \/ S.Port \/ SBUS In (Redundancy Func.)\u003cbr\u003e– CP2-12: PWM \/ SBUS Out \/ FBUS \/ S.Port\u003c\/li\u003e\n\u003cli\u003eFBUS \/ S.Port\u003c\/li\u003e\n\u003cli\u003eSBUS Out Port (Supports 16CH \/ 24CH mode)\u003c\/li\u003e\n\u003cli\u003eSBUS In Port (Supports Signal Redundancy)\u003c\/li\u003e\n\u003cli\u003eOver-The-Air (OTA) FW Update\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency: 900MHz \u0026amp; 2.4GHz\u003c\/li\u003e\n\u003cli\u003eDimension: 48.5*33*17.9mm (L*W*H)\u003c\/li\u003e\n\u003cli\u003eWeight: 23g\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 3.5-10V (Recommend 2S Li Batteries)\u003c\/li\u003e\n\u003cli\u003eOperating Current: ≤170mA\u003c\/li\u003e\n\u003cli\u003eContinuous Current: ≤20A (power the device) | Instaneous Current: ≤40A (power the device)\u003c\/li\u003e\n\u003cli\u003eVoltage Measurement Range via AIN (External device): 0-35V (Battery Voltage Divider Ratio: 1:10)\u003c\/li\u003e\n\u003cli\u003eCompatibility: Tandem series radio \u0026amp; TD protocol capable RF module\u003c\/li\u003e\n\u003cli\u003eDual XT30 Power Input Connector\u003c\/li\u003e\n\u003cli\u003eTriple Antenna Design (2×2.4G \u0026amp; 1×900M antennas)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003ePackage Include\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrSky TD SR12*1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Frsky","offers":[{"title":"Default Title","offer_id":40691954843718,"sku":"03022035","price":219.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/td_sr12-1_2b817559-67ee-4498-93b6-600a81eab190.jpg?v=1739162362"},{"product_id":"frsky-archer-plus-sr12-gyro-stabilized-receiver-with-both-access-accst-d16-modes","title":"FrSky ARCHER PLUS SR12+ gyro-stabilized receiver with both ACCESS \u0026 ACCST D16 modes","description":"\u003ch3\u003eFrSky ARCHER PLUS SR12+\u003c\/h3\u003e\n\u003cp\u003eThe Archer line of receivers has been enhanced further with the addition of the new Archer Plus Series.\u003c\/p\u003e\n\u003cp\u003eThe Archer Plus series receivers include some new features. Firstly an enhanced anti-RF-Interference capability can offer a more solid RF performance, and this is in addition to existing anti-interfere performance in the spark ignition process. These Plus series receivers are also with both ACCESS and ACCST D16 modes, where the RF protocol is smart matched during the binding process on the radio. With the Black-Box function, some basic flight data (like Power \u0026amp; Signal related) can be well preserved.\u003c\/p\u003e\n\u003cp\u003eThe Archer Plus SR12+ are gyro-stabilized receivers with a built-in 3-axis gyroscope and 3-axis accelerometer and feature multiple flight modes (Auto-level, Stabilization, Knife-Edge, etc.). The stabilization mode has been enhanced with 5 additional stabilization channels, providing pin mapping to each channel in the multiple flight modes.\u003c\/p\u003e\n\u003cp\u003eThe SR12+ receivers have 12 configurable channel ports\u003cstrong\u003e*\u003c\/strong\u003e, each channel port can be assigned as PWM, SBUS, FBUS, or S.Port. The SR12+ supports full-range signal strength with dual detachable antennas and guarantees optimal antenna reception and range. The SR12+ can be used as a Primary receiver in a redundant solution by setting a port (Channel Port 1) as SBUS In and connecting to any other FrSky receiver equipped with an SBUS Out port. With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (XACT servos, ADV Sensors, etc.) as well as simplifying the builds setup.\u003c\/p\u003e\n\u003cp\u003eThe SR12+ also provides a socket that can be used to connect the switch panel to enable the built-in Power Switch function, and it uses a set of standard XT30 plugs which also provides a safe and efficient way to provide power. By utilizing together with current overload wires on the channel ports, the connected device can be safeguarded.\u003c\/p\u003e\n\u003cp\u003e(\u003cstrong\u003e\u003cem\u003e*\u003c\/em\u003e\u003c\/strong\u003e\u003cem\u003eSome features require the support of ACCESS and ETHOS.\u003c\/em\u003e)\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnhanced Anti RF-Interference Capability with more Solid RF Performance\u003c\/li\u003e\n\u003cli\u003eSmart-Matched ACCESS \u0026amp; ACCST D16 modes\u003c\/li\u003e\n\u003cli\u003eBuilt-in 3-Axis Gyroscope \u0026amp; 3-Axis Accelerometer Sensor\u003c\/li\u003e\n\u003cli\u003eBasic Black-Box Data Record Function\u003c\/li\u003e\n\u003cli\u003eBuilt-in Power Switch Function | Match with Different External Switches (Optional)\u003c\/li\u003e\n\u003cli\u003e12 Configurable Channel Ports* (PWM, SBUS, FBUS, or S.Port)\u003cbr\u003e(Note: In ACCST mode, SBUS Out is assigned on Pin11 \u0026amp; S.Port is on Pin12.)\u003c\/li\u003e\n\u003cli\u003eSupports Signal Redundancy (SBUS In)\u003c\/li\u003e\n\u003cli\u003eFull Control Range with Telemetry (FBUS \/ S.Port)\u003c\/li\u003e\n\u003cli\u003eAnti-Interference Capability in the Spark-Ignition Process\u003c\/li\u003e\n\u003cli\u003eOver-The-Air (OTA) Firmware Update\u003c\/li\u003e\n\u003cli\u003eExternal Battery\/Device Voltage Detection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDimension: 48.5×33×17.9mm (L×W×H)\u003c\/li\u003e\n\u003cli\u003eWeight: 21.5g\u003c\/li\u003e\n\u003cli\u003eOperating Voltage Range: 3.5 -10V (Recommend 2S Li-Batteries)\u003c\/li\u003e\n\u003cli\u003eOperating Current: ＜115mA@5V\u003c\/li\u003e\n\u003cli\u003eContinuous Current: ≤20A (power the device) ｜ Instantaneous Current: ≤40A (power the device)\u003c\/li\u003e\n\u003cli\u003eVoltage Measurement Range via AIN2 (External device): 0-35V (Battery Voltage Divider Ratio: 1:10)\u003c\/li\u003e\n\u003cli\u003eAntenna connector: IPEX1\u003c\/li\u003e\n\u003cli\u003eDual XT30 Power Input Connector\u003c\/li\u003e\n\u003cli\u003eCompatibility: FrSky 2.4GHz ACCESS \/ ACCST D16 capable transmitters\u003c\/li\u003e\n\u003cli\u003e12 Configurable Channel Ports (ACCESS mode)\u003cbr\u003eCP1: PWM \/ SBUS Out \/ FBUS \/ S.Port \/ SBUS In\u003cbr\u003eCP2-12: PWM \/ SBUS Out \/ FBUS \/ S.Port\u003c\/li\u003e\n\u003cli\u003eSBUS Out (Supports 16CH \/ 24CH mode)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Frsky","offers":[{"title":"Default Title","offer_id":40713135554630,"sku":"03020119","price":149.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/archer_plus_sr12_-1_269ff777-aac4-4da4-af4c-a4fed2e81941.jpg?v=1726643112"},{"product_id":"frsky-dual-2-4ghz-tw-r6-receiver","title":"FrSky DUAL 2.4GHz TW R6 Receiver","description":"\u003cp\u003e\u003cstrong\u003eFrSky TW R6 Receiver\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTWIN series TW R6 receiver features a new stable TW protocol that benefits from simultaneously integrating dual active 2.4G frequency bands. The TW active-active protocol is different from the general active-standby redundancy solutions (where one receiver takes over signal control only when the other is in Failsafe mode), with the TW protocol, dual 2.4G frequency bands are active on the TW series receiver at the same time. This receiver is designed for RC users who want to benefit from resilience and long-range in their radio communications, typically up to tens of kilometers is achievable.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/media.horusrc.com\/wysiwyg\/Products\/TW-R6-__1.jpg\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe TW R6 receiver is equipped with 2x 2.4G antennas. The signal output ports include one SBUS output channel and 6 PWM output channel ports. It also supports telemetry functions through FBUS \/ S.Port. By setting the TW R6 to use FBUS protocol in the ETHOS system, the signal control and telemetry can be connected to any device that supports FBUS protocol through only one line to achieve bidirectional transmission, also simplifying the model build using fewer wires. In addition to all this, the inverted S.Port on the receiver can allow for easily connecting flight controllers.\u003c\/p\u003e\n\u003cp\u003eIn addition, TW R6 also supports 4ms race mode with ultra-low latency. When combining race mode with TW series resilient dual 2.4G solution, racers have a fast, stable, and reliable signal in racing competitions, without fear of signal loss due to interference.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"color_font\"\u003e● Simultaneous working dual 2.4G TW mode\u003cbr\u003e● Black-Box function\u003cbr\u003e● 4ms race mode with telemetry\u003cbr\u003e● Long control range (Range varies based on the RF Power settings.)\u003cbr\u003e● 6 PWM channel ports\u003cbr\u003e● SBUS Out (Supports 16CH \/ 24CH mode)\u003cbr\u003e● FBUS \/ S.Port\u003cbr\u003e● Inverted S.Port\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"color_font\"\u003e●Frequency: Dual 2.4GHz\u003cbr\u003e●Dimension: 38.1*14.6*9.5mm (L*W*H)\u003cbr\u003e●Weight: 5g\u003cbr\u003e●Operating Voltage: 3.5-10V (Please ensure the supplied voltage exceeds 2.8V during the use.)\u003cbr\u003e●Operating Current: 60mA@5V\u003cbr\u003e●Voltage Measurement Range via AIN2 (External device): 0-36V\u003cbr\u003e●Antenna connector: IPEX4\u003cbr\u003e●Compatibility: TWIN series Radio \u0026amp; RF module in TW mode.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"color_font\"\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e\u003cspan\u003e:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1x FrSky TW R6 Dual 2.4GHz Receiver\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"color_font\"\u003e\u003ca title=\"Download Manual and Firmware FrSky TW R6\" href=\"https:\/\/www.frsky-rc.com\/twr6\/\" target=\"_blank\" rel=\"noopener\"\u003eDownload Manual and Firmware\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Frsky","offers":[{"title":"Default Title","offer_id":40719611166790,"sku":"03022025","price":78.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/tw_r6_2_7da70cd1-a682-400a-afc7-20bd6899e6ce.jpg?v=1713232586"},{"product_id":"frsky-archer-plus-sr6-mini-gyro-stabilized-receiver-with-both-access-accst-d16-modes","title":"FrSky ARCHER PLUS SR6 Mini -Gyro Stabilized Receiver with both ACCESS \u0026 ACCST D16 modes","description":"\u003cp\u003e\u003cspan\u003eThe Archer line of receivers has been enhanced further with the addition of the new Archer Plus Series. The Archer Plus Series receivers include some new features. Firstly an enhanced anti-RF-interference capability can offer a more solid and stable RF performance. These AP series receivers also with both ACCESS and ACCST D16 modes, where the RF protocol is smartly matched during the binding process on the radio. In ACCESS mode, these receivers not only feature OTA wireless firmware upgrades, increased range, and telemetry performance, they also support even more functions like configurable telemetry power and protocol switching (S.Port \/ F.Port \/ FBUS).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe AP Mini-series 6-channel receiver features a small form factor in lightweight. It is equipped with a 2.4G signal antenna. These receivers have 6 PWM signal output ports. By using the included servo connector adapter cable(includes 1mm to 1.25mm 3Pin conversion cable), they can flexibly meet different connectors of regular servos on the market offering multiple options for interface access.\u003c\/p\u003e\n\u003cp\u003eThrough the specific S.Port cable, the receivers can be easily connected to a transmitter with an S.Port for the firmware upgrade, or sensors for the telemetry. When the S.Port is set to FBUS mode through the ETHOS system, the setting features of all FBUS-capable devices in the link now can be directly configured through the ETHOS system using Lua script tools, and in FBUS mode, the receivers can output 24 signal channels in total.\u003c\/p\u003e\n\u003cp\u003eThe SR6Mini receiver is a  gyro-stabilized receiver with a built-in 3-axis gyroscope and 3-axis accelerometer and feature multiple flight modes (Auto-level, Stabilization, Knife-Edge, etc.). The stabilization mode has been enhanced with 5 additional stabilization channels, providing pin mapping to each channel in the multiple flight modes.\u003c\/p\u003e\n\u003cp\u003e(*Some features require the support of ACCESS and ETHOS.)\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e● Enhanced Anti-RF-Interference Capability with More Solid RF Performance\u003cbr\u003e● Small and Lightweight\u003cbr\u003e● 6 High-Precision PWM Output Channel Ports\u003cbr\u003e● S.Port \/ F.Port \/ FBUS (Configurable via S.Port)\u003cbr\u003e● Over-The-Air (OTA) FW update\u003cbr\u003e● Smart-Matched ACCESS \u0026amp; ACCST D16 Modes\u003cbr\u003e● Supports Stabilization Function (SR6Mini \/ SR6Mini-E)\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e● Enhanced Anti-RF-Interference Capability with More Solid RF Performance\u003cbr\u003e● Small and Lightweight\u003cbr\u003e● 6 High-Precision PWM Output Channel Ports\u003cbr\u003e● S.Port \/ F.Port \/ FBUS (Configurable via S.Port)\u003cbr\u003e● Over-The-Air (OTA) FW update\u003cbr\u003e● Smart-Matched ACCESS \u0026amp; ACCST D16 Modes\u003cbr\u003e● Supports Stabilization Function (SR6Mini \/ SR6Mini-E)\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.frsky-rc.com\/wp-content\/uploads\/Downloads\/Amanual\/ARCHER%20PLUS%20R6%20SR6%20Mini%20Manual.pdf\"\u003eManual available here\u003c\/a\u003e\u003c\/p\u003e","brand":"Frsky","offers":[{"title":"Default Title","offer_id":40806368051270,"sku":"03020122","price":58.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/archer_plus_6ch_mini_1_1_33303948-b721-401d-93e0-f0932fc80bd7.jpg?v=1715828632"},{"product_id":"frsky-2-4g-900m-tandem-dual-band-receiver-td-r12-with-12-channel-ports","title":"FrSky 2.4G 900M Tandem Dual-Band Receiver TD R12 with 12 Channel Ports","description":"\u003ch2\u003eFrSky TD R12 equipped with a triple antenna (2×2.4G \u0026amp; 1×900M)\u003c\/h2\u003e\n\u003cp\u003eThe Tandem (TD) dual-band receivers are unlike any other FrSky 2.4Ghz or 900Mhz receivers, they work simultaneously at both 900Mhz and 2.4Ghz frequencies. That means TD receivers provide not only low latency signal and long-range control but also benefit from the enhanced level of high reliability and anti-interference performance.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/media.horusrc.com\/wysiwyg\/Products\/TD-R12_.jpg\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe TD R12 receiver is equipped with a triple antenna (2×2.4G \u0026amp; 1×900M) design that provides multi-directional wide coverage for the remote signal and is designed for RC users who want to benefit from resilience and long-range in their radio communications.\u003c\/p\u003e\n\u003cp\u003eTD R12 also provides a socket that can be used to connect the NFC Switch panel to enable the built-in Power Switch function. Dual-power provides a safe and efficient way to power the system with your power sources connected via a pair of standard XT30 connections. The dual-power consumption system is designed to operate in balance mode, where it consumes the power line from either power source depending on which has the higher voltage. With a built-in black box module, the data (Power \u0026amp; Signal related) under unusual status during the flight can be recorded by TD receivers.\u003c\/p\u003e\n\u003cp\u003eThe configurable 12-channel ports are a big feature of TD R12, each channel port can be assigned as PWM, SBUS, FBUS, or S.Port. With the FBUS protocol, the Tandem series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (Neuron ESC, Advance Sensors, etc.) as well as simplifying the builds setup.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSimultaneous Working Dual-Band (900M\/2.4G) TD Mode\u003c\/li\u003e\n\u003cli\u003eDual Power Balancing Consumption\u003c\/li\u003e\n\u003cli\u003eBasic Black-Box Data Record Function\u003c\/li\u003e\n\u003cli\u003eBuilt-in Power Switch Function | Match with Different External Switches (Optional)\u003c\/li\u003e\n\u003cli\u003e4ms Race Mode with Telemetry\u003c\/li\u003e\n\u003cli\u003eLong Control Range (Range varies based on the RF Power settings.)\u003c\/li\u003e\n\u003cli\u003e12 Configurable Channel Ports\u003cbr\u003e– CP1: PWM \/ SBUS Out \/ FBUS \/ S.Port \/ SBUS In (Redundancy Func.)\u003cbr\u003e– CP2-12: PWM \/ SBUS Out \/ FBUS \/ S.Port\u003c\/li\u003e\n\u003cli\u003eFBUS \/ S.Port\u003c\/li\u003e\n\u003cli\u003eSBUS Out Port (Supports 16CH \/ 24CH mode)\u003c\/li\u003e\n\u003cli\u003eSBUS In Port (Supports Signal Redundancy)\u003c\/li\u003e\n\u003cli\u003eOver-The-Air (OTA) FW Update\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency: 900MHz \u0026amp; 2.4GHz\u003c\/li\u003e\n\u003cli\u003eDimension: 48.5*33*17.9mm (L*W*H)\u003c\/li\u003e\n\u003cli\u003eWeight: 23g\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 3.5-10V (Recommend 2S Li Batteries)\u003c\/li\u003e\n\u003cli\u003eOperating Current: ≤170mA\u003c\/li\u003e\n\u003cli\u003eContinuous Current: ≤20A (power the device) | Instaneous Current: ≤40A (power the device)\u003c\/li\u003e\n\u003cli\u003eVoltage Measurement Range via AIN (External device): 0-35V (Battery Voltage Divider Ratio: 1:10)\u003c\/li\u003e\n\u003cli\u003eCompatibility: Tandem series radio \u0026amp; TD protocol capable RF module\u003c\/li\u003e\n\u003cli\u003eDual XT30 Power Input Connector\u003c\/li\u003e\n\u003cli\u003eTriple Antenna Design (2×2.4G \u0026amp; 1×900M antennas)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003ePackage Includes\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrSky TD R12\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FrSky","offers":[{"title":"Default Title","offer_id":40863390531654,"sku":"03022036","price":164.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/td-r12-1_79f25d06-25d2-4e17-9c08-3183c371a4c6.jpg?v=1734066867"},{"product_id":"frsky-2-4g-900m-tandem-dual-band-receiver-td-sr10-stabilized-receiver-with-10-channel-ports","title":"FrSky 2.4G 900M Tandem Dual-Band Receiver TD SR10 Stabilized Receiver with 10 Channel Ports","description":"\u003ch2 class=\"page-title\"\u003eFrSky TD SR10 Receiver \u003c\/h2\u003e\n\u003cp\u003eThe Tandem dual-band receivers are unlike any other FrSky 2.4Ghz or 900Mhz receivers, they work simultaneously at both 2.4Ghz and 900Mhz frequencies. That means Tandem receivers provide not only the low latency signal and long-range control but also benefit from the enhanced level of high reliability and anti-interference performance.\u003c\/p\u003e\n\u003cp\u003eThe Tandem series receivers adopt the triple antenna design that provides multi-directional wide coverage for the remote signal. The data (Power \u0026amp; Signal related) under unusual status during the flight can be recorded by Tandem receivers through a built-in black box module.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"alignnone size-full wp-image-14850\" src=\"https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/12\/TD-SR10-%E8%8B%B1%E6%96%87.jpg\" sizes=\"(max-width: 650px) 100vw, 650px\" srcset=\"https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/12\/TD-SR10-英文.jpg 650w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/12\/TD-SR10-英文-300x83.jpg 300w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/12\/TD-SR10-英文-150x42.jpg 150w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/12\/TD-SR10-英文-600x166.jpg 600w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/12\/TD-SR10-英文-350x97.jpg 350w\" alt=\"\" width=\"650\" height=\"180\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe configurable 10 channel ports are a big feature of TD SR10, each channel port can be assigned as PWM, SBUS, FBUS, or S.Port. With the FBUS protocol, the TD receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (Neuron ESC, Advance Sensors, etc.) as well as simplifying the build setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eADV Stabilizer\u003c\/strong\u003e\u003cbr\u003eThe TD SR10 offers an ADV Stabilizer function which is an upgrade over the original classical gyroscope stabilization modes. The ADV Stabilizer offers an advanced mode that provides more programmable stabilized channels and flexibility.\u003c\/p\u003e\n\u003cp\u003eThe classical stabilization mode has been enhanced with 5 additional stabilization channels, providing pin mapping to each channel in the multiple flight modes like Stabilization, Auto-Level, Hover, and Knife-Edge with an airplane model.\u003c\/p\u003e\n\u003cp\u003eIn the advanced stabilization mode, all the output pins are configurable for stabilization and additional advanced features such as Stab file sharing, programmable parameters, developer access, etc.\u003c\/p\u003e\n\u003cp\u003eThe advanced stabilizer feature incorporates high-precision telemetry sensors to monitor altitude, vertical speed, etc. This ADV feature is an additional benefit compared to using a regular S series stabilization receiver.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSimultaneous working dual-band TD mode\u003c\/li\u003e\n\u003cli\u003eTriple antenna design for multi-directional coverage\u003c\/li\u003e\n\u003cli\u003eBuilt-in Advanced Stabilization Functions\u003c\/li\u003e\n\u003cli\u003eBuilt-in High-Precision Telemetry Sensor (Altitude, Vertical Speed, etc.)\u003c\/li\u003e\n\u003cli\u003eBlack Box function\u003c\/li\u003e\n\u003cli\u003eBuilt-in voltage sensor\u003c\/li\u003e\n\u003cli\u003e4ms Race Mode with Telemetry\u003c\/li\u003e\n\u003cli\u003eLong control range (Range varies based on the RF Power settings.)\u003c\/li\u003e\n\u003cli\u003eOver-The-Air (OTA) FW update\u003c\/li\u003e\n\u003cli\u003eSupply current range（every single port）\u003cbr\u003e– Instantaneous current: 5A\u003cbr\u003e– Continuous current: 3A\u003c\/li\u003e\n\u003cli\u003e10 Configurable Channel Ports\u003cbr\u003e– CP1: PWM \/ SBUS Out \/ FBUS \/ S.Port \/ SBUS In\u003cbr\u003e– CP2-10: PWM \/ SBUS Out \/ FBUS \/ S.Port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency: 2.4GHz \u0026amp; 900MHz\u003c\/li\u003e\n\u003cli\u003eDimension: 46.5×26.3×14.7mm (L×W×H)\u003c\/li\u003e\n\u003cli\u003eWeight: 16.6g\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 3.5-10v DC\u003c\/li\u003e\n\u003cli\u003eOperating Current: ≤180mA@5V\u003c\/li\u003e\n\u003cli\u003eCompatibility: Tandem series transmitter \u0026amp; TD protocol capable RF module\u003c\/li\u003e\n\u003cli\u003eVoltage Measurement Range via AIN2 (External device): 0-35V (Battery Voltage Divider Ratio: 1:10)\u003c\/li\u003e\n\u003cli\u003eTriple 2.4G\/900M Antenna\u003cbr\u003e– 2×External 2.4G antenna (IPEX1)\u003cbr\u003e– 1×External 900M antenna (IPEX1)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003ePackage Include\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrSky TD SR10*1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Frsky","offers":[{"title":"Default Title","offer_id":41642018340934,"sku":"03022038","price":159.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/td_sr10_1_2eb43e49-c056-4810-b2c8-f9992a4c4bea.jpg?v=1730067803"},{"product_id":"frsky-2-4g-900m-tandem-dual-band-receiver-td-sr6-stabilized-receiver-with-6-channel-ports","title":"FrSky 2.4G 900M Tandem Dual-Band Receiver TD SR6 Stabilized Receiver with 6 Channel Ports","description":"\u003ch2 class=\"page-title\"\u003eFrSky TD SR6 Receiver \u003c\/h2\u003e\n\u003cp\u003eThe Tandem dual-band receivers are unlike any other FrSky 2.4Ghz or 900Mhz receivers, they work simultaneously at both 2.4Ghz and 900Mhz frequencies. That means Tandem receivers provide not only the low latency signal and long-range control but also benefit from the enhanced level of high reliability and anti-interference performance.\u003c\/p\u003e\n\u003cp\u003eThe Tandem series receivers adopt a dual-band antenna design (2.4GHz \u0026amp; 900MHz) that provides multi-directional wide coverage for the remote signal. The telemetry data (Power \u0026amp; Signal related) can be recorded using the built-in black box module within the Tandem receiver, useful for capturing data from any unusual status during the flight.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"alignnone size-full wp-image-14867\" src=\"https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/12\/TD-SR6-%E8%8B%B1%E6%96%87.jpg\" sizes=\"(max-width: 650px) 100vw, 650px\" srcset=\"https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/12\/TD-SR6-英文.jpg 650w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/12\/TD-SR6-英文-300x78.jpg 300w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/12\/TD-SR6-英文-150x39.jpg 150w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/12\/TD-SR6-英文-600x157.jpg 600w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/12\/TD-SR6-英文-350x92.jpg 350w\" alt=\"\" width=\"650\" height=\"170\"\u003e\u003c\/p\u003e\n\u003cp\u003eTD SR6 receiver offers 6 PWM channel outputs and is bundled in a compact lightweight design, the receiver also provides output pins accordingly for SBUS Out and FBUS\/S.Port. By setting the S.Port to the FBUS protocol, the TD receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (Neuron ESC, Advance Sensors, etc.) as well as simplifying the build setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStabilization Function\u003c\/strong\u003e\u003cbr\u003eThe TD SR6 offers an enhanced Stabilization function which is an upgrade over the original classical gyroscope stabilization modes. The TD SR6 offers an advanced mode that provides more programmable stabilized channels and flexibility.\u003c\/p\u003e\n\u003cp\u003eThe classical stabilization mode has been enhanced with 5 additional stabilization channels, providing pin mapping to each channel in the multiple flight modes like Stabilization, Auto-Level, Hover, and Knife-Edge with an airplane model.\u003c\/p\u003e\n\u003cp\u003eIn the advanced stabilization mode, all the output pins are configurable for stabilization and additional advanced features such as Stab file sharing, programmable parameters, developer access, etc.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSimultaneous working 2.4G\u0026amp;900M dual-band TD mode\u003c\/li\u003e\n\u003cli\u003eDual-band antenna design for multi-directional coverage\u003c\/li\u003e\n\u003cli\u003eCompact lightweight design\u003c\/li\u003e\n\u003cli\u003eBuilt-in Stabilization Function\u003c\/li\u003e\n\u003cli\u003eBlack Box function\u003c\/li\u003e\n\u003cli\u003e4ms race mode with telemetry\u003c\/li\u003e\n\u003cli\u003eLong control range (Range varies based on the RF Power settings.)\u003c\/li\u003e\n\u003cli\u003eOver-The-Air (OTA) FW update\u003c\/li\u003e\n\u003cli\u003e6 PWM channel ports\u003c\/li\u003e\n\u003cli\u003eFBUS \/ S.Port\u003c\/li\u003e\n\u003cli\u003eSBUS Out (Supports 16CH \/ 24CH mode)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency: 2.4GHz \u0026amp; 900MHz\u003c\/li\u003e\n\u003cli\u003eDimension: 47.5×20.4×10.9mm (L*W*H)\u003c\/li\u003e\n\u003cli\u003eWeight: 11.5g\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 3.5-10V (recommend 3.7-8.4V)\u003c\/li\u003e\n\u003cli\u003eOperating Current: ≤110mA@5V\u003c\/li\u003e\n\u003cli\u003eCompatibility: TANDEM series radio \u0026amp; RF module in TD mode.\u003c\/li\u003e\n\u003cli\u003e2.4G\/900M antenna connector: IPEX1\u003c\/li\u003e\n\u003cli\u003eVoltage Measurement Range via AIN2 (External device): 0-35V (Battery Voltage Divider Ratio: 1:10)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003ePackage Include\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrSky TD SR6*1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Frsky","offers":[{"title":"Default Title","offer_id":41642058973254,"sku":"03022037","price":114.45,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/td_sr6_03022037_3573c4aa-1f09-43fa-9890-a0684790f202.jpg?v=1734066891"},{"product_id":"frsky-archer-plus-r12-receiver-with-both-access-accst-d16-modes","title":"FrSky ARCHER PLUS R12+ receiver with both ACCESS \u0026 ACCST D16 modes","description":"\u003ch3\u003eFrSky ARCHER PLUS R12+\u003c\/h3\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Archer line of receivers has been enhanced further with the addition of the new Archer Plus Series.\u003c\/p\u003e\n\u003cp\u003eThe Archer Plus series receivers include some new features. Firstly an enhanced anti-RF-Interference capability can offer a more solid RF performance, and this is in addition to existing anti-interfere performance in the spark ignition process. These Plus series receivers are also with both ACCESS and ACCST D16 modes, where the RF protocol is smart matched during the binding process on the radio. With the Black-Box function, some basic flight data (like Power \u0026amp; Signal related) can be well preserved.\u003c\/p\u003e\n\u003cp\u003eThe R12+ receivers have 12 configurable channel ports\u003cstrong\u003e*\u003c\/strong\u003e, each channel port can be assigned as PWM, SBUS, FBUS, or S.Port. The R12+ supports full-range signal strength with dual detachable antennas and guarantees optimal antenna reception and range. The R12+ can be used as a Primary receiver in a redundant solution by setting a port (Channel Port 1) as SBUS In and connecting to any other FrSky receiver equipped with an SBUS Out port. With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (XACT servos, ADV Sensors, etc.) as well as simplifying the builds setup.\u003c\/p\u003e\n\u003cp\u003eThe R12+ also provides a socket that can be used to connect the switch panel to enable the built-in Power Switch function, and it uses a set of standard XT30 plugs which also provides a safe and efficient way to provide power. By utilizing together with current overload wires on the channel ports, the connected device can be safeguarded.\u003c\/p\u003e\n\u003cp\u003e(\u003cstrong\u003e\u003cem\u003e*\u003c\/em\u003e\u003c\/strong\u003e\u003cem\u003eSome features require the support of ACCESS and ETHOS.\u003c\/em\u003e)\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnhanced Anti RF-Interference Capability with more Solid RF Performance\u003c\/li\u003e\n\u003cli\u003eSmart-Matched ACCESS \u0026amp; ACCST D16 modes\u003c\/li\u003e\n\u003cli\u003eBasic Black-Box Data Record Function\u003c\/li\u003e\n\u003cli\u003eBuilt-in Power Switch Function | Match with Different External Switches (Optional)\u003c\/li\u003e\n\u003cli\u003e12 Configurable Channel Ports* (PWM, SBUS, FBUS, or S.Port)\u003cbr\u003e(Note: In ACCST mode, SBUS Out is assigned on Pin11 \u0026amp; S.Port is on Pin12.)\u003c\/li\u003e\n\u003cli\u003eSupports Signal Redundancy (SBUS In)\u003c\/li\u003e\n\u003cli\u003eFull Control Range with Telemetry (FBUS \/ S.Port)\u003c\/li\u003e\n\u003cli\u003eAnti-Interference Capability in the Spark-Ignition Process\u003c\/li\u003e\n\u003cli\u003eOver-The-Air (OTA) Firmware Update\u003c\/li\u003e\n\u003cli\u003eExternal Battery\/Device Voltage Detection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDimension: 48.5×33×17.9mm (L×W×H)\u003c\/li\u003e\n\u003cli\u003eWeight: 21.3g\u003c\/li\u003e\n\u003cli\u003eOperating Voltage Range: 3.5 -10V (Recommend 2S Li-Batteries)\u003c\/li\u003e\n\u003cli\u003eOperating Current: ＜105mA@5V\u003c\/li\u003e\n\u003cli\u003eContinuous Current: ≤20A (power the device) ｜ Instaneous Current: ≤40A (power the device)\u003c\/li\u003e\n\u003cli\u003eVoltage Measurement Range via AIN2 (External device): 0-35V (Battery Voltage Divider Ratio: 1:10)\u003c\/li\u003e\n\u003cli\u003eAntenna connector: IPEX1\u003c\/li\u003e\n\u003cli\u003eDual XT30 Power Input Connector\u003c\/li\u003e\n\u003cli\u003eCompatibility: FrSky 2.4GHz ACCESS \/ ACCST D16 capable transmitters\u003c\/li\u003e\n\u003cli\u003e12 Configurable Channel Ports (ACCESS mode)\u003cbr\u003eCP1: PWM \/ SBUS Out \/ FBUS \/ S.Port \/ SBUS In\u003cbr\u003eCP2-12: PWM \/ SBUS Out \/ FBUS \/ S.Port\u003c\/li\u003e\n\u003cli\u003eSBUS Out (Supports 16CH \/ 24CH mode)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Frsky","offers":[{"title":"Default Title","offer_id":41642142138438,"sku":"03020118","price":123.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/archer_plus_r12_-1_a80cf115-fa4f-4fa0-ab90-66bed9318b19.jpg?v=1726643160"},{"product_id":"frsky-dual-2-4ghz-tw-gr6-receiver","title":"FrSky DUAL 2.4GHz TW GR6 Receiver","description":"\u003cp\u003e\u003cstrong\u003eFrSky TW GR6 Receiver\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTWIN series TWGR6 receiver features a new stable TW protocol that benefits from simultaneously integrating dual active 2.4G frequency bands. The TW active-active protocol is different from the general active-standby redundancy solutions (where one receiver takes over signal control only when the other is in Failsafe mode), with the TW protocol, dual 2.4G frequency bands are active on the TW series receiver at the same time.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/media.horusrc.com\/wysiwyg\/Products\/TW-GR6-_.jpg\" alt=\"\" width=\"750\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis receiver is designed for RC users who want to benefit from resilience and long-range in their radio communications, typically up to tens of kilometers is achievable. TWGR6 receiver features an upgraded high-precision variometer that gives pilots quick, accurate altitude and vertical speed data and is ideal for any type of glider pilot.\u003c\/p\u003e\n\u003cp\u003eThe TWGR6 receiver is equipped with 2x 2.4G antennas. The signal output ports include one SBUS output channel and 6 PWM output channel ports. It also supports telemetry functions through FBUS \/ S.Port. By setting the TWGR6 to use FBUS protocol in the ETHOS system, the signal control and telemetry can be connected to any device that supports FBUS protocol through only one line to achieve bidirectional transmission, also simplifying the model build using fewer wires. In addition to all this, the inverted S.Port on the receiver can allow for easily connecting flight controllers.\u003c\/p\u003e\n\u003cp\u003eIn addition, TWGR6 also supports 4ms race mode with ultra-low latency. When combining race mode with TW series resilient dual 2.4G solution, racers have a fast, stable, and reliable signal in racing competitions, without fear of signal loss due to interference.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSimultaneous working dual 2.4G TW mode\u003c\/li\u003e\n\u003cli\u003eHigh-precision variometer sensor\u003c\/li\u003e\n\u003cli\u003eBlack-Box function\u003c\/li\u003e\n\u003cli\u003e4ms race mode with telemetry\u003c\/li\u003e\n\u003cli\u003eLong control range (Range varies based on the RF Power settings.)\u003c\/li\u003e\n\u003cli\u003eOver-The-Air (OTA) FW update\u003c\/li\u003e\n\u003cli\u003e6 PWM channel ports\u003c\/li\u003e\n\u003cli\u003eSBUS Out (Supports 16CH \/ 24CH mode)\u003c\/li\u003e\n\u003cli\u003eFBUS \/ S.Port\u003c\/li\u003e\n\u003cli\u003eInverted S.Port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency: Dual 2.4GHz\u003c\/li\u003e\n\u003cli\u003eDimension: 1*14.6*9.5mm (L*W*H)\u003c\/li\u003e\n\u003cli\u003eWeight: 5g\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 3.5-10V (Please ensure the supplied voltage exceeds 2.8V during the use.)\u003c\/li\u003e\n\u003cli\u003eOperating Current: 60mA@5V\u003c\/li\u003e\n\u003cli\u003eVariometer Measurement Range\u003c\/li\u003e\n\u003cli\u003eAltimeter Range \u0026amp; Resolution: -700m to 10000m \u0026amp; 0.1m\u003c\/li\u003e\n\u003cli\u003eVertical Speed Range: ±10m\/s\u003c\/li\u003e\n\u003cli\u003eVoltage Measurement Range via AIN2 (External device): 0-36V\u003c\/li\u003e\n\u003cli\u003eAntenna connector: IPEX4\u003c\/li\u003e\n\u003cli\u003eCompatibility: TWIN series Radio \u0026amp; RF module in TW mode.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FrSky","offers":[{"title":"Default Title","offer_id":42014019190854,"sku":"03022024","price":83.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/tw_gr6.jpg?v=1724024510"},{"product_id":"frsky-audio-jack-switch-panel-for-archer-plus-td-tw-receiver","title":"FrSky Audio Jack Switch Panel for Archer plus\/ TD\/ TW Receiver","description":"\u003cp\u003eFrSky Audio Jack Switch Panel for TD R18 Receiver\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: FrSky\u003c\/li\u003e\n\u003cli\u003eItem Name: FrSky Audio Jack Switch Panel for Archer plus\/ TD\/ TW Receiver (more than 12 channels)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x FrSky Audio Jack Switch Panel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FrSky","offers":[{"title":"Default Title","offer_id":42014074536006,"sku":"03072002","price":17.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/02_1.jpg?v=1730067900"},{"product_id":"frsky-switch-extension-cord-adapt-for-rb25-s-rb35-s-archer-plus-12ch-tw-12ch-td-12ch-18ch","title":"FrSky Switch Extension Cord adapt for RB25\/S, RB35\/S, ARCHER PLUS 12CH, TW 12CH, TD 12CH \/ 18CH","description":"\u003ch3\u003eSwitch Extension Cord adapt for RB25\/S, RB35\/S, ARCHER PLUS 12CH, TW 12CH, TD 12CH \/ 18CH\u003c\/h3\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003eSwitch Extension Cord allows you to extend the reach of your switches, enabling convenient operation from a greater distance. In addition, this cord also ensures compatibility with third-party devices, expanding your options~\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/media.horusrc.com\/wysiwyg\/FrSky_Products_.jpg\" alt=\"\" width=\"455\" height=\"455\"\u003e\u003c\/p\u003e\n\u003ch3\u003ePackage Including\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eSwitch Extension Cord *1\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FrSky","offers":[{"title":"Default Title","offer_id":42014081974342,"sku":"01100410","price":5.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/01100410_switch_4a09c6d4-5ef0-4d95-ae73-bfde7e0727d1.jpg?v=1734066842"},{"product_id":"frsky-dual-2-4ghz-tw-mx-receiver","title":"FrSky DUAL 2.4GHz TW MX Receiver","description":"\u003cp\u003e\u003cstrong\u003eFrSky TW MX Receiver\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTWIN series TWMX receiver features a new stable TW protocol that benefits from simultaneously integrating dual active 2.4G frequency bands. The TW active-active protocol is different from the general active-standby redundancy solutions (where one receiver takes over signal control only when the other is in Failsafe mode), with the TW protocol, dual 2.4G frequency bands are active on the TW series receiver at the same time.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/media.horusrc.com\/wysiwyg\/Products\/TW-MX-_.jpg\" alt=\"\" width=\"539\" height=\"141\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis receiver is designed for RC users who want to benefit from resilience and long-range in their radio communications, typically tens of kilometers are achievable. The TWMX receiver is light weight and its smaller size occupies less space which makes it very suitable for users who have constraints with limited installation space and weight.\u003c\/p\u003e\n\u003cp\u003eAs a micro receiver, the TWMX receiver is equipped with 2x 2.4G antennas. The signal output ports include one SBUS output channel and 4 PWM output channel ports. TWMX receiver also supports telemetry functions through FBUS \/ S.Port. By setting the TWMX to use FBUS protocol in the ETHOS system, the signal control and telemetry can be connected to any device that supports FBUS protocol through only one line to achieve bidirectional transmission, also simplifying the model build using fewer wires.\u003c\/p\u003e\n\u003cp\u003eIn addition, TWMX also supports 4ms race mode with ultra-low latency. When combining race mode with TW series resilient dual 2.4G solution, racers have a fast, stable, and reliable signal in racing competitions, without fear of signal loss due to interference.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSimultaneous working dual 2.4G TW mode\u003c\/li\u003e\n\u003cli\u003eBlack Box function\u003c\/li\u003e\n\u003cli\u003e4ms race mode with telemetry\u003c\/li\u003e\n\u003cli\u003eLong control range (Range varies based on the RF Power settings.)\u003c\/li\u003e\n\u003cli\u003eOver-The-Air (OTA) FW update\u003c\/li\u003e\n\u003cli\u003e4 PWM channel ports\u003c\/li\u003e\n\u003cli\u003eSBUS Out (Supports 16CH \/ 24CH mode)\u003c\/li\u003e\n\u003cli\u003eFBUS \/ S.Port\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FrSky","offers":[{"title":"Default Title","offer_id":42222659403846,"sku":"03022023","price":64.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/tw-mx-1_fd869f3d-98d5-4f6c-b3f5-0b5094c6b04d.png?v=1734066936"},{"product_id":"frsky-overload-protection-cable-5a-current-limit-protection-line-extension-line","title":"FrSky Overload Protection Cable, 5A Current Limit Protection Line, Extension Line","description":"\u003ch3\u003eFrSky Overload Protection Cable, 5A Current Limit Protection Line, Extension Line\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThis overload protection cable is \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003esuitable \u003c\/span\u003efor FrSky\u003cspan\u003eRB25\/RB25S , TW SR12\/R12, TD SR18\/R18,TD SR12\/R12\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eDescription\u003c\/h3\u003e\n\u003cp\u003e5A Overload Protection Cable can enhance the safety and reliability of your device's power supply, safeguarding your flights.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/media.horusrc.com\/wysiwyg\/FrSky_Products_.jpg\" alt=\"\" width=\"572\" height=\"572\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFrSky\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eItem Name:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFrSky Overload Protection Cable\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 x FrSky Overload Protection Cable\u003c\/p\u003e","brand":"FrSky","offers":[{"title":"Default Title","offer_id":42365745102918,"sku":"04100323","price":8.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/04100323-5a_-1.png?v=1734066932"},{"product_id":"frsky-frid-remote-id-module","title":"FrSky FrID Remote ID Module","description":"\u003ch3\u003eFrSky FrID RemoteID Module\u003c\/h3\u003e\n\u003cp\u003eFrID (FrSky Remote ID Module) is a device in compliance with the FAA ASTM F3586-22 Standard. Attaching the FrID module to a Drones or RC aircraft, it can broadcast the route and other required information according to the standard request, and all the information will be transmitted to the monitor App in real-time for getting a compliant and safe flight. Additionally, by using the FBUS\/S.Port capable receivers together with the FrID module, all the telemetry information of the module can be read directly on the radios.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e●Dimension: 36×20 mm\u003cbr\u003e●Weight: 8g\u003cbr\u003e●Operational Voltage: DC 4 -10V\u003cbr\u003e●FrID Remote Broadcast Module\u003cbr\u003e– BLE4 \u0026amp; BLE5 2.4GHz\u003cbr\u003e– FCC Certificated Module\u003cbr\u003e\u003ca href=\"https:\/\/uasdoc.faa.gov\/listDocs\/RID000001575\" target=\"_blank\" rel=\"noopener\"\u003e–FAA ASTM F3586-22 Standard Compliance\u003c\/a\u003e\u003cbr\u003e●Basic information in compliance with the FAA standard\u003cbr\u003e– Drone ID\u003cbr\u003e– Drone Location and Altitude\u003cbr\u003e– Drone Velocity and Heading\u003cbr\u003e– Takeoff Location and Elevation\u003cbr\u003e– Time Mark\u003cbr\u003e●Built-in UBLOX MAX-7Q GPS\u003cbr\u003e●Supports upgrading firmware via the S.Port\/FBUS interface\u003cbr\u003e●Antenna type: chip antenna\u003cbr\u003e●Bright LED status indicator\u003cbr\u003e●Operating temperature: -40°C to +85°C\u003cbr\u003e●Supports telemetry readings on the radio (by connecting to S.Port\/FBUS capable receivers.)\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/media.horusrc.com\/wysiwyg\/Products\/FrID_Manual_page-000.png\" alt=\"\" width=\"526\" height=\"526\"\u003e\u003c\/p\u003e","brand":"FrSky","offers":[{"title":"Default Title","offer_id":42450147147846,"sku":"03040621","price":97.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/frid-1.png?v=1738733200"},{"product_id":"frsky-remote-nfc-panel","title":"FrSky Remote NFC Panel","description":"\u003cp\u003eQuickly combine the NFC Power Switch Panel, and now you can simply utilize the NFC key to on\/off the power wirelessly. Apply to the 18CH\/12CH Receivers, RB25\/30\/35\/40, NFC Power Switch, and Power Switch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBand: FrSky\u003c\/li\u003e\n\u003cli\u003eItem Name: FrSky Remote NFC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x FrSky Remote NFC\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FrSky","offers":[{"title":"Default Title","offer_id":42474427875398,"sku":"03071404","price":54.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/3_6_2.png?v=1738119935"},{"product_id":"frsky-pilot-gear-controller-pgc","title":"FrSky Pilot Gear Controller (PGC)","description":"\u003cp\u003eThe FrSky PGC(Pilot Gear Controller)is a multiple-functional module with a comprehensive and smart control system that offers pilots a programmable door gear operation and a confident landing assistant with gyros for the braking and steering control.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLanding \u0026amp; Door Gear Control System\u003c\/li\u003e\n\u003cli\u003eAdjustable Braking Performance\u003c\/li\u003e\n\u003cli\u003eWheels' Gyro Assist Capability\u003c\/li\u003e\n\u003cli\u003e3 Independent Adjustable BEC Voltages\u003c\/li\u003e\n\u003cli\u003eVoltage Output Supply with Stability and Reliability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Pilot Gear Controller (PGC) module is a control system not only functional for the landing \u0026amp; door gear of\u003cbr\u003ethe Jet\/Plane which includes a landing system, also incorporates an adjustable brake capability and adds the\u003cbr\u003eGyro assist function for all the wheels (steering and brake) to get you each flight a smooth take-off and landing\u003cbr\u003eexperience.\u003c\/p\u003e\n\u003cp\u003eApart from the functional features, providing a stable and reliable power supply system with flexibility is also a\u003cbr\u003ebig integrated advantage. There are 3 individual BEC voltage outputs for different connected devices\u003cbr\u003eseparately, and users can also prefer a one-battery solution to power the PGC and its connected gears and\u003cbr\u003ereceivers.\u003cbr\u003e\u003cimg class=\"aligncenter wp-image-15203 size-full\" src=\"https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2025\/01\/8687861d687c1a53bdc4723f50f6fd3.png\" sizes=\"(max-width: 941px) 100vw, 941px\" srcset=\"https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2025\/01\/8687861d687c1a53bdc4723f50f6fd3.png 941w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2025\/01\/8687861d687c1a53bdc4723f50f6fd3-300x170.png 300w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2025\/01\/8687861d687c1a53bdc4723f50f6fd3-150x85.png 150w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2025\/01\/8687861d687c1a53bdc4723f50f6fd3-768x435.png 768w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2025\/01\/8687861d687c1a53bdc4723f50f6fd3-600x340.png 600w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2025\/01\/8687861d687c1a53bdc4723f50f6fd3-350x198.png 350w\" alt=\"\" width=\"941\" height=\"533\"\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan class=\"w-tabs-item-title\"\u003eFEATURES\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLanding \u0026amp; Door Gear Control System\u003c\/li\u003e\n\u003cli\u003eAdjustable Braking Performance\u003c\/li\u003e\n\u003cli\u003eWheels’ Gyro Assist Capability\u003c\/li\u003e\n\u003cli\u003e3 Independent Adjustable BEC Voltages\u003c\/li\u003e\n\u003cli\u003eVoltage Output Supply with Stability and Reliability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan class=\"w-tabs-item-title\"\u003eSPECIFICATIONS\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDimension: 68.6×50×18mm (L×W×H)\u003c\/li\u003e\n\u003cli\u003eWeight: 81.6g\u003c\/li\u003e\n\u003cli\u003eBattery Input Connector: XT30\u003c\/li\u003e\n\u003cli\u003eBattery Voltage Input Range: 8.4-60V\u003c\/li\u003e\n\u003cli\u003eOperating Current: 65mA@12V\u003c\/li\u003e\n\u003cli\u003eAdjustable Voltage Output Range：6.0V~12V\u003cbr\u003eNote: 6-12V output can be FULLY adjustable under powering by a battery of 4S to 14S. While powering with a 2S\/3S battery, the output volts can also be adjustable, but not achievable up to 12V (output upper limit is less than its input)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FrSky","offers":[{"title":"Default Title","offer_id":42495692144710,"sku":"03062001","price":229.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/03062001_pgc_pilot_gear_controller_1.png?v=1738813071"},{"product_id":"rotorflight-vantac-rf007-archer-twin-fbl-helicopter-flight-controller","title":"ROTORFLIGHT VANTAC RF007 Archer+, Twin, FBL Helicopter Flight Controller","description":"\u003ch3\u003eROTORFLIGHT VANTAC RF007 FBL Helicopter Flight Controller\u003c\/h3\u003e\n\u003ch3\u003e\u003cimg src=\"https:\/\/media.horusrc.com\/wysiwyg\/Products\/RF007_FBL_Helicopter_Flight_Controller-2.png\" alt=\"\" width=\"783\" height=\"432\"\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/Buj2c3MSWYo?si=x_4-sFKhuGcLvhaz\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e● Flight Controller Firmware: Rotorflight 2.x\u003cbr\u003e● Dimension: 43.5×31.2×13.7mm\u003cbr\u003e● Weight: 25.2g\u003cbr\u003e\u003cspan\u003e● Receiver Options:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- RF007 ARCHER+: Built-In 2.4G Archer Plus RS Receiver\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- RF007 TWIN: Built-In Dual 2.4G TW R6 Receiver\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- RF007 TANDEM: Built-In 2.4G\u0026amp;900M Dual-Band TD MX receiver\u003c\/span\u003e\u003cbr\u003e● Operating Current (FC Only): 125mA@5V\u003cbr\u003e● Voltage Measurement Range via AIN (External device): 0-80V\u003cbr\u003e● RxUG Port: For Upgrading Internal RX Firmware (In case of OTA upgrade failure)\u003cbr\u003e- Note: When powering this RxUG port, do not introduce additional power input from other ports to ensure the safe operation of the connected devices.\u003cbr\u003e=====================================================================================\u003cbr\u003e● MCU: STM32F722RET6\u003cbr\u003e● Gyroscope (IMU): ICM-42688P\u003cbr\u003e● Barometer: SPL06-001\u003cbr\u003e● Blackbox Flash: 128MB\u003cbr\u003e● Servo Ports: Servo 1, Servo 2, Servo 3, Tail\u003cbr\u003e● ESC Ports: ESC (Throttle), RPM (Sensor), TLM (ESC Telemetry or other functions)\u003cbr\u003e● Other Ports: AUX and SBUS Out\/In\u003cbr\u003e● Expansion Ports: Port A, C, and RxUG\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cp\u003e● Runs Rotorflight 2.x Helicopter Control Software\u003cbr\u003e● Built-In FrSky FBUS-Capable Receiver (TW or AP Protocol)\u003cbr\u003e● Robust CNC Aluminum Case, Functional Heatsink for MCU\u003cbr\u003e● STM32F722 Microcontroller for Power and Flexibility\u003cbr\u003e● Precision Barometer, 3-Axis Gyroscope and 3-Axis Accelerometer\u003cbr\u003e● 128MB Blackbox Function for Tuning\/Troubleshooting\u003cbr\u003e● 9 Primary Main Header Pins for Flexibility and Power Distribution\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.frsky-rc.com\/wp-content\/uploads\/Downloads\/Amanual\/VANTAC%20RF007%20Manual.pdf\"\u003eRF007 Manual Link\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"FrSky","offers":[{"title":"Archer Plus","offer_id":42499646619718,"sku":"RF007-P","price":149.0,"currency_code":"AUD","in_stock":true},{"title":"Twin Dual 2.4G TW","offer_id":42499646652486,"sku":"RF007-T","price":165.0,"currency_code":"AUD","in_stock":false},{"title":"2.4G\u0026900M Dual-Band TD","offer_id":44707461955654,"sku":"RF007-D","price":165.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/rf007_fbl_helicopter_flight_controller_4_8112d4b5-2ddd-4637-a365-c47e9b4b89fa.png?v=1772678397"},{"product_id":"frsky-hall-rpm-sensor-adv","title":"FrSky Hall RPM Sensor ADV","description":"\u003cp\u003eFrSky ADVANCE (ADV) series has comprehensive sensor types and enhanced the performance and capability of the original sensor line, all ADV sensors fully support FBUS protocol and they are also S.Port compatible. With the FBUS protocol, the ADV sensors can be seamlessly paired with the FBUS-capable receiver and further simplifying the builds setup.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"alignnone wp-image-15810\" src=\"https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2025\/08\/Hall-RPM-ADV-%E9%95%BF%E5%9B%BE-1-300x173.jpg\" sizes=\"(max-width: 700px) 100vw, 700px\" srcset=\"https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2025\/08\/Hall-RPM-ADV-长图-1-300x173.jpg 300w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2025\/08\/Hall-RPM-ADV-长图-1-150x86.jpg 150w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2025\/08\/Hall-RPM-ADV-长图-1-768x442.jpg 768w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2025\/08\/Hall-RPM-ADV-长图-1-600x345.jpg 600w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2025\/08\/Hall-RPM-ADV-长图-1-350x201.jpg 350w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2025\/08\/Hall-RPM-ADV-长图-1.jpg 1000w\" alt=\"\" width=\"700\" height=\"403\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe Hall RPM ADV sensor can be used to measure rotational speed. When connected directly to a receiver with the S.Port\/FBUS port, telemetry data can be transmitted and read by compatible radios. Alternatively, when the sensor is switched to PWM mode, it can pass the rotation data through to a device port that supports RPM calculation, achieving the same purpose of RPM data collection.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSPECIFICATIONS\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimension(Sensor): 18×10mm (L×W)\u003c\/li\u003e\n\u003cli\u003eDimension(Magnet): φ6×3mm\u003c\/li\u003e\n\u003cli\u003eWeight(Sensor): 2.5g\u003c\/li\u003e\n\u003cli\u003eWeight(Magnet): 0.64g\/block\u003c\/li\u003e\n\u003cli\u003eVoltage Range: 3.7V-8.4V\u003c\/li\u003e\n\u003cli\u003eRPM Measurement Range: 400-60000RPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.frsky-rc.com\/wp-content\/uploads\/Downloads\/Amanual\/Hall%20RPM%20ADV%20Manual.pdf\"\u003eManual\u003c\/a\u003e\u003c\/p\u003e","brand":"Frsky","offers":[{"title":"Default Title","offer_id":44345610600518,"sku":"04100490","price":29.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/04100490_hall_rpm_adv_1_1.png?v=1765691303"},{"product_id":"frsky-rb35s-built_in-advanced-stabilization-functions-for-turbine-jet-etc","title":"FrSky RB35S Built_in Advanced Stabilization Functions-For Turbine Jet, etc.","description":"\u003cp\u003e\u003cspan\u003eThe RB-35\/RB-35S builds on the success of the previous trusted Redundancy Bus series by adding many new features, such as configurable dual power input, dual BEC outputs, overload \/ current detection, the new ADV stabilizer (RB-35S), etc. The RB-35\/RB-35S system has been designed to meet the needs of users who want the ultimate flight-safe performance and safety for their RC Models.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/0AyJrsRnoQw?si=6wDpzS6zK22KcC0a\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/media.horusrc.com\/wysiwyg\/Products\/RB-35-RB-35S-_.jpg\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"color_font\"\u003e\u003cstrong\u003eTriple Receiver Redundancy \u0026amp; Dual Power Input\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"color_font\"\u003eRB-35\/RB-35S has been designed to offer both dual-power and triple-receiver redundancy. This provides the user triple receiver signal and telemetry redundancy by adding multiplex ports (RX1-3 IN \/ S.Port). Dual-power provides a safe and efficient way to power the system with your power sources connected via a pair of standard XT30 connections.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"color_font\"\u003eThe dual-power consumption system can operate either in Balance or Backup mode. In Balance Mode (default), it consumes the power line from either power source depending on which has the higher voltage. When switching to the Backup Mode, the system consumes the power line with the priority that the user selected under the set voltage range.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"color_font\"\u003e\u003cstrong\u003eDual BEC Outputs \u0026amp; Overload Protection \u0026amp; Current Detection\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"color_font\"\u003eThe RB-35\/RB-35S includes a built-in Dual BEC, each XT30 output port can be independently configured to provide between 5V to 8.4V output. The unit’s BEC also can change channel output voltage for ports using VOut1: CH1-9, VOut2: CH10-24, and the rest ports. All Channel ports are provided with overload protection, and in addition, Channels 1-9 support the current detection function.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"color_font\"\u003e\u003cstrong\u003eAdvanced Stabilizer\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe RB-35S offers an ADV Stabilizer function which is an upgrade over the original classical gyroscope stabilization modes. The ADV Stabilizer offers an advanced mode that provides more programmable stabilized channels and flexibility.\u003c\/p\u003e\n\u003cp\u003eThe classical stabilization mode has been enhanced with 5 additional stabilization channels, providing pin mapping to each channel in the multiple flight modes like Stabilization, Auto-Level, Hover, and Knife-Edge with an airplane model.\u003c\/p\u003e\n\u003cp\u003eIn the advanced stabilization mode, all the RB-35S output pins are configurable for stabilization and additional advanced features such as File Sharing, Programmable Parameters, Developer Access, etc.\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"color_font\"\u003e\u003cstrong\u003eDiversified Sensor Telemetry \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe RB-35\/RB-35S also works as an extensive sensor module with various built-in sensors including diversified telemetry. The RB-35S also includes high-precision telemetry sensors for monitoring altitude, vertical speed, etc. can be also used as an alternative to using a GR or S series receiver.\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"color_font\"\u003e\u003cstrong\u003ePower Switch Function\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe built-in power switch function draws the support of using multiple types of external switches (e.g. NFC switch, Pin Plug, etc.) that enable flexible options on how the power can be switched on\/off without the need to plug\/unplug the battery connections.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDual Power Input \u0026amp; Triple Receiver Redundant Guarantee\u003c\/li\u003e\n\u003cli\u003eRX In | FBUS\/SBUS\/S.Port Auto Recognization\u003cbr\u003e(Note: Only the S.Port on the RX1 channel port can be used to upgrade firmware.)\u003c\/li\u003e\n\u003cli\u003eBuilt-in Advanced Stabilization Functions\u003c\/li\u003e\n\u003cli\u003eBuilt-in High-Precision Telemetry Sensor (Altitude, Vertical Speed, etc.)\u003c\/li\u003e\n\u003cli\u003eBuilt-in Power Switch Function | Match with Different External Switches (Optional)\u003c\/li\u003e\n\u003cli\u003eDual Power Input (Balance \/ Backup mode)\u003c\/li\u003e\n\u003cli\u003eIndependently Configurable Dual BEC Outputs\u003cbr\u003e(BEC 1: VOut1 \u0026amp; CH1-9 | BEC 2: VOut2 \u0026amp; CH10-24 \u0026amp; all other Ports)\u003c\/li\u003e\n\u003cli\u003eOverload Protection on Each Channel\u003c\/li\u003e\n\u003cli\u003eChannel1-9 with Current Detection\u003c\/li\u003e\n\u003cli\u003eFull Black Box Data Record Function\u003c\/li\u003e\n\u003cli\u003eSupports External LED Indication\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDimension: 114.4*73.4*18.7mm (L*W*H)\u003c\/li\u003e\n\u003cli\u003eWeight: 99g\u003c\/li\u003e\n\u003cli\u003eNumber of Configurable Channel Ports: 24 (PWM\/FBUS\/S.Port\/SBUS Out)\u003c\/li\u003e\n\u003cli\u003e3 RX Input Ports \u0026amp; 1 LED Indicator Port\u003c\/li\u003e\n\u003cli\u003eBattery Input Voltage Range: DC7.4-26V (It is recommended to use 3S-6S Li batteries)\u003cbr\u003e(Note: 2S Li Batteries will not have sufficient input supply voltage to reach the 8.4V BEC output configuration.)\u003c\/li\u003e\n\u003cli\u003eOperating Current: 200mA@12V\u003c\/li\u003e\n\u003cli\u003eContinuous Current: 2*15A@5-8.4V (BEC Outputs)\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -20°C~75°C\u003c\/li\u003e\n\u003cli\u003eBattery Input \u0026amp; BEC Output Connector: XT30\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Frsky","offers":[{"title":"Default Title","offer_id":44553956261958,"sku":"03071610","price":369.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/rb35s.png?v=1770014491"},{"product_id":"frsky-td-2-4g-900m-dual-band-sr18-stabilized-receiver-with-18ch-ports","title":"FrSky TD 2.4G 900M Dual-Band SR18 Stabilized Receiver with 18CH Ports","description":"\u003ch3\u003e\u003cstrong\u003eFrSky 2.4G 900M Tandem Dual-Band Receiver TD SR18 Receiver with 18CH Ports\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Tandem (TD) dual-band receivers are unlike any other FrSky 2.4Ghz or 900Mhz receivers, they work simultaneously at both 900Mhz and 2.4Ghz frequencies. That means TD receivers provide not only the low latency signal and long range control, also benefits from enhanced level of high reliability and anti-interference performance.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"alignnone wp-image-14535 size-full\" src=\"https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/07\/TD-SR18-%E8%8B%B1%E6%96%87.jpg\" sizes=\"(max-width: 650px) 100vw, 650px\" srcset=\"https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/07\/TD-SR18-英文.jpg 650w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/07\/TD-SR18-英文-300x125.jpg 300w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/07\/TD-SR18-英文-150x62.jpg 150w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/07\/TD-SR18-英文-600x249.jpg 600w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2023\/07\/TD-SR18-英文-350x145.jpg 350w\" alt=\"\" width=\"650\" height=\"270\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe TD SR18 receiver is equipped with triple antenna (2×2.4G \u0026amp; 1×900M) design that provides multi-directional wide coverage for the remote signal and designed for RC users who want to benefit from resilience and long-range in their radio communications.\u003c\/p\u003e\n\u003cp\u003eTD SR18 also provides a socket that can be used to connect the NFC Switch panel to enable the built-in Power Switch function. Dual-power provides a safe and efficient way to power the system with your power sources connected via a pair of standard XT30 connections. The dual-power consumption system is designed to operate in balance mode, where it consumes the power line from either power source depending on which has the higher voltage. With a built-in black box module, the data (Power \u0026amp; Signal related) under unusual status during the flight can be recorded by TD receivers.\u003c\/p\u003e\n\u003cp\u003eThe configurable 18-channel ports are a big feature of TD SR18, each channel port can be assigned as PWM, SBUS, FBUS, or S.Port. With the FBUS protocol, the Tandem series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices (Neuron ESC, Advance Sensors, etc.) as well as simplifying the builds setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eADV Stabilizer\u003c\/strong\u003e\u003cbr\u003eThe TD SR18 offers an ADV Stabilizer function which is an upgrade over the original classical gyroscope stabilization modes. The ADV Stabilizer offers an advanced mode that provides more programmable stabilized channels and flexibility.\u003c\/p\u003e\n\u003cp\u003eThe classical stabilization mode has been enhanced with 5 additional stabilization channels, providing pin mapping to each channel in the multiple flight modes like Stabilization, Auto-Level, Hover, and Knife-Edge with an airplane model.\u003c\/p\u003e\n\u003cp\u003eIn the advanced stabilization mode, all the output pins are configurable for stabilization and additional advanced features such as Stab file sharing, programmable parameters, and developer access, etc.\u003c\/p\u003e\n\u003cp\u003eThe advanced stabilizer feature incorporates high-precision telemetry sensors to monitor altitude, vertical speed, etc. This ADV feature is an additional benefit compared to using a regular S series stabilization receiver.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSimultaneous Working Dual-Band (900M\/2.4G) TD Mode\u003c\/li\u003e\n\u003cli\u003eDual Power Balancing Consumption\u003c\/li\u003e\n\u003cli\u003eBuilt-in Advanced Stabilization Functions (TD SR18)\u003c\/li\u003e\n\u003cli\u003eBuilt-in High-Precision Telemetry Sensor (Altitude, Vertical Speed, etc.) (TD SR18)\u003c\/li\u003e\n\u003cli\u003eBasic Black-Box Data Record Function\u003c\/li\u003e\n\u003cli\u003eBuilt-in Power Switch Function | Match with Different External Switches (Optional)\u003c\/li\u003e\n\u003cli\u003e4ms Race Mode with Telemetry\u003c\/li\u003e\n\u003cli\u003eLong Control Range (Range varies based on the RF Power settings.)\u003c\/li\u003e\n\u003cli\u003e18 Configurable Channel Ports\u003cbr\u003e– CP1: PWM \/ SBUS Out \/ FBUS \/ S.Port \/ SBUS In (Redundancy Func.)\u003cbr\u003e– CP2-18: PWM \/ SBUS Out \/ FBUS \/ S.Port\u003c\/li\u003e\n\u003cli\u003eFBUS \/ S.Port\u003c\/li\u003e\n\u003cli\u003eSBUS Out Port (Supports 16CH \/ 24CH mode)\u003c\/li\u003e\n\u003cli\u003eSBUS In Port (Supports Signal Redundancy)\u003c\/li\u003e\n\u003cli\u003eOver-The-Air (OTA) FW Update\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency: 900MHz \u0026amp; 2.4GHz\u003c\/li\u003e\n\u003cli\u003eDimension: 53*40*16mm (L*W*H)\u003c\/li\u003e\n\u003cli\u003eWeight: 29.1g\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 4-12V(Recommend 2S Li Batteries)\u003c\/li\u003e\n\u003cli\u003eOperating Current: ≤195mA\u003c\/li\u003e\n\u003cli\u003eContinuous Current: ≤30A (power the device) | Instantaneous Current: ≤60A (power the device)\u003c\/li\u003e\n\u003cli\u003eVoltage Measurement Range via AIN (External device): 0-35V (Battery Voltage Divider Ratio: 1:10)\u003c\/li\u003e\n\u003cli\u003eCompatibility: Tandem series radio \u0026amp; TD protocol capable RF module\u003c\/li\u003e\n\u003cli\u003eDual XT30 Power Input Connector\u003c\/li\u003e\n\u003cli\u003eTriple Antenna Design (2×2.4G \u0026amp; 1×900M antennas)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Frsky","offers":[{"title":"Default Title","offer_id":44707398582342,"sku":"03022026","price":259.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/td_sr18_1.png?v=1772676508"},{"product_id":"frsky-opto-rpm-adv-advanced-optical-rpm-sensor","title":"FrSky Opto RPM ADV - Advanced Optical RPM Sensor","description":"\u003cdiv\u003e\n\u003cdiv class=\"embed-responsive embed-responsive-16by9\"\u003e\u003ciframe width=\"300\" height=\"150\" class=\"embed-responsive-item\" src=\"https:\/\/www.youtube.com\/embed\/S5ohpUE8zbY\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eFrSky ADVANCE (ADV) series has comprehensive sensor types and enhanced the performance and capability of the original sensor line, all ADV sensors fully support FBUS protocol and they are also S.Port compatible. With the FBUS protocol, the ADV sensors can be seamlessly paired with the FBUS-capable receiver and further simplifying the builds setup.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"alignnone wp-image-15945 size-large\" src=\"https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2026\/01\/Opto-RPM-ADV-1024x221.png\" sizes=\"(max-width: 1024px) 100vw, 1024px\" srcset=\"https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2026\/01\/Opto-RPM-ADV-1024x221.png 1024w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2026\/01\/Opto-RPM-ADV-300x65.png 300w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2026\/01\/Opto-RPM-ADV-150x32.png 150w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2026\/01\/Opto-RPM-ADV-768x166.png 768w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2026\/01\/Opto-RPM-ADV-600x129.png 600w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2026\/01\/Opto-RPM-ADV-350x76.png 350w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2026\/01\/Opto-RPM-ADV.png 1404w\" alt=\"\" width=\"1024\" height=\"221\"\u003e\u003cbr\u003eThe OPTO RPM ADV sensor can be used to measure rotational speed. When connected directly to a receiver with the S.Port\/FBUS port, telemetry data can be transmitted and read by compatible radios. Alternatively, when the sensor is switched to PWM mode, it can pass the rotation data through to a device port that supports RPM calculation, achieving the same purpose of RPM data collection.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan class=\"w-tabs-item-title\"\u003eSPECIFICATIONS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimension: 27.8×26×12.5mm (L×W×H)\u003c\/li\u003e\n\u003cli\u003eWeight: 4g\u003c\/li\u003e\n\u003cli\u003eVoltage Range: 3.7V~8.4V\u003c\/li\u003e\n\u003cli\u003eRPM Range: 600~600,000RPM\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Frsky","offers":[{"title":"Default Title","offer_id":44707506094150,"sku":"04100491","price":29.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/1_1__4.png?v=1772679039"},{"product_id":"frsky-wireless-trainer-module-lite-type","title":"FrSky Wireless Trainer Module - Lite Type","description":"\u003ch2\u003eFrSky Wireless Trainer Module - Lite Type\u003c\/h2\u003e\n\u003cp\u003eThe FWTM Lite trainer module is an alternative option for pilots who do not have the radio with the PARA trainer system but still expect to use the trainer system remotely. Power the trainer module by attaching it to the radio module bay, now the student radio can bind the trainer module in ACCST or ACCESS mode and work at low latency, so a simple wireless trainer system build is completed very quickly. By plugging an Audio type trainer cable into the trainer module, this module system also provides a wired way to create connections between master and student radios.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/xSuzrsA6YAM?si=ZmSe5ZLgQoN5-BH4\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWireless Trainer Control with Low Latency\u003c\/li\u003e\n\u003cli\u003eSupports Wired Trainer Connection via Audio Port\u003c\/li\u003e\n\u003cli\u003eSmart-Matched ACCESS \u0026amp; ACCST D16 Modes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency: 2.4GHz\u003c\/li\u003e\n\u003cli\u003eDimension (L*W*H): 62.4×30×14.5mm\u003c\/li\u003e\n\u003cli\u003eOperating Voltage Range: 6.5V-8.4V\u003c\/li\u003e\n\u003cli\u003eOperating Current: 15mA@7.4V\u003c\/li\u003e\n\u003cli\u003eCompatible with XJT \/ Lite Type Module Bay\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Frsky","offers":[{"title":"Default Title","offer_id":44784294985798,"sku":"03150008","price":54.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/fwtm_lite.png?v=1774046995"},{"product_id":"frsky-archer-plus-r6-lite","title":"FrSky Archer Plus R6 Lite","description":"\u003cp\u003eThe Archer line of receivers has been enhanced further with the addition of the new Archer Plus Series. The Archer Plus Series receivers include some new features. Firstly, an enhanced anti-RF-interference capability can offer a more solid and stable RF performance. These AP series receivers also with both ACCESS and ACCST D16 modes, where the RF protocol is smartly matched during the binding process on the radio. In ACCESS mode, these receivers not only feature OTA wireless firmware upgrades, increased range, and telemetry performance, they also support even more functions like configurable telemetry power and protocol switching(S.Port\/F.Port\/FBUS).\u003cbr\u003e\u003cimg class=\"alignnone wp-image-15971 size-full\" src=\"https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2026\/03\/Archer-Plus-R6L-SR6L.png\" sizes=\"(max-width: 867px) 100vw, 867px\" srcset=\"https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2026\/03\/Archer-Plus-R6L-SR6L.png 867w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2026\/03\/Archer-Plus-R6L-SR6L-300x68.png 300w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2026\/03\/Archer-Plus-R6L-SR6L-150x34.png 150w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2026\/03\/Archer-Plus-R6L-SR6L-768x174.png 768w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2026\/03\/Archer-Plus-R6L-SR6L-600x136.png 600w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2026\/03\/Archer-Plus-R6L-SR6L-350x79.png 350w\" alt=\"\" width=\"867\" height=\"196\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe AP Lite-series 6-channel receivers feature a compact layout design in functions and are equipped with a 2.4G signal antenna. These receivers have 6 of regular 3-Pin PWM signal output connectors on one end, and can offer multiple function ports through SBUS In\/Out, S.Port\/FBUS, and AIN on the other end. By using the included connector adapter cable, users can achieve those functions for different system buildings with flexible feature combinations.\u003c\/p\u003e\n\u003cp\u003eThrough the specific S.Port cable, the receivers can be easily connected to a transmitter with an S.Port for the firmware upgrade, or sensors for the telemetry. When the S.Port is set to FBUS mode through the ETHOS system, the setting features of all FBUS-capable devices in the link can now be directly configured through the ETHOS system using Lua script tools, and in FBUS mode, the receivers can output 24 signal channels in total.\u003c\/p\u003e\n\u003cp\u003e(*Some features require the support of ACCESS and ETHOS.)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnhanced Anti-RF-Interference Capability with More Solid RF Performance\u003c\/li\u003e\n\u003cli\u003eSmart-matched ACCESS \u0026amp; ACCST D16 modes\u003c\/li\u003e\n\u003cli\u003e6 High-precision PWM Channel Ports\u003c\/li\u003e\n\u003cli\u003eSBUS Out Port (Supports 16CH\/24CH mode)\u003c\/li\u003e\n\u003cli\u003eSBUS In Port (Supports Signal Redundancy)\u003c\/li\u003e\n\u003cli\u003eFull Control Range with Telemetry (FBUS\/F.Port\/S.Port)\u003c\/li\u003e\n\u003cli\u003eOver-The-Air (OTA) Firmware Update\u003c\/li\u003e\n\u003cli\u003eExternal Battery\/Device Voltage Detection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimension: 45×18.5×9mm (L×W×H)\u003c\/li\u003e\n\u003cli\u003eWeight: 5.6g\u003c\/li\u003e\n\u003cli\u003eNumber of Channels: 6\/24 channels\u003c\/li\u003e\n\u003cli\u003eOperating Voltage Range: 3.5~10V\u003c\/li\u003e\n\u003cli\u003eOperating Current: ＜65mA@5V\u003c\/li\u003e\n\u003cli\u003eOperating Range: ＞2km (Full range) (*Range may vary based on local conditions.)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVoltage Measurement Range via AIN2 (External device): 0-35V (Battery Voltage Divider Ratio: 1:10)\u003c\/li\u003e\n\u003cli\u003eAntenna Connector: IPEX1\u003c\/li\u003e\n\u003cli\u003eCompatibility: FrSky 2.4GHz ACCESS \/ ACCST D16 capable transmitters\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Frsky","offers":[{"title":"Default Title","offer_id":44922936885318,"sku":"03020124","price":35.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/1_28_2_1f9efe81-a38d-420a-b9c8-5917c39295b1.png?v=1776652106"},{"product_id":"frsky-archer-plus-sr6-lite","title":"FrSky Archer Plus SR6 Lite","description":"\u003cp\u003eThe Archer line of receivers has been enhanced further with the addition of the new Archer Plus Series. The Archer Plus Series receivers include some new features. Firstly, an enhanced anti-RF-interference capability can offer a more solid and stable RF performance. These AP series receivers also with both ACCESS and ACCST D16 modes, where the RF protocol is smartly matched during the binding process on the radio. In ACCESS mode, these receivers not only feature OTA wireless firmware upgrades, increased range, and telemetry performance, they also support even more functions like configurable telemetry power and protocol switching(S.Port\/F.Port\/FBUS).\u003cbr\u003e\u003cimg class=\"alignnone wp-image-15971 size-full\" src=\"https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2026\/03\/Archer-Plus-R6L-SR6L.png\" sizes=\"(max-width: 867px) 100vw, 867px\" srcset=\"https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2026\/03\/Archer-Plus-R6L-SR6L.png 867w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2026\/03\/Archer-Plus-R6L-SR6L-300x68.png 300w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2026\/03\/Archer-Plus-R6L-SR6L-150x34.png 150w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2026\/03\/Archer-Plus-R6L-SR6L-768x174.png 768w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2026\/03\/Archer-Plus-R6L-SR6L-600x136.png 600w, https:\/\/www.frsky-rc.com\/wp-content\/uploads\/2026\/03\/Archer-Plus-R6L-SR6L-350x79.png 350w\" alt=\"\" width=\"867\" height=\"196\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe Archer Plus SR6 Lite are gyro-stabilized receivers with a built-in 3-axis gyroscope and 3-axis accelerometer and feature multiple flight modes (Auto-level, Stabilization, Knife-Edge, etc.) and configuration methods.\u003c\/p\u003e\n\u003cp\u003eThe AP Lite-series 6-channel receivers feature a compact layout design in functions and are equipped with a 2.4G signal antenna. These receivers have 6 of regular 3-Pin PWM signal output connectors on one end, and can offer multiple function ports through SBUS In\/Out, S.Port\/FBUS, and AIN on the other end. By using the included connector adapter cable, users can achieve those functions for different system buildings with flexible feature combinations.\u003c\/p\u003e\n\u003cp\u003eThrough the specific S.Port cable, the receivers can be easily connected to a transmitter with an S.Port for the firmware upgrade, or sensors for the telemetry. When the S.Port is set to FBUS mode through the ETHOS system, the setting features of all FBUS-capable devices in the link can now be directly configured through the ETHOS system using Lua script tools, and in FBUS mode, the receivers can output 24 signal channels in total.\u003c\/p\u003e\n\u003cp\u003e(*Some features require the support of ACCESS and ETHOS.)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnhanced Anti-RF-Interference Capability with More Solid RF Performance\u003c\/li\u003e\n\u003cli\u003eSmart-matched ACCESS \u0026amp; ACCST D16 modes\u003c\/li\u003e\n\u003cli\u003e6 High-precision PWM Channel Ports\u003c\/li\u003e\n\u003cli\u003eSBUS Out Port (Supports 16CH\/24CH mode)\u003c\/li\u003e\n\u003cli\u003eSBUS In Port (Supports Signal Redundancy)\u003c\/li\u003e\n\u003cli\u003eFull Control Range with Telemetry (FBUS\/F.Port\/S.Port)\u003c\/li\u003e\n\u003cli\u003eOver-The-Air (OTA) Firmware Update\u003c\/li\u003e\n\u003cli\u003eExternal Battery\/Device Voltage Detection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimension: 45×18.5×9mm (L×W×H)\u003c\/li\u003e\n\u003cli\u003eWeight: 5.6g\u003c\/li\u003e\n\u003cli\u003eNumber of Channels: 6\/24 channels\u003c\/li\u003e\n\u003cli\u003eOperating Voltage Range: 3.5~10V\u003c\/li\u003e\n\u003cli\u003eOperating Current: ＜65mA@5V\u003c\/li\u003e\n\u003cli\u003eOperating Range: ＞2km (Full range) (*Range may vary based on local conditions.)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVoltage Measurement Range via AIN2 (External device): 0-35V (Battery Voltage Divider Ratio: 1:10)\u003c\/li\u003e\n\u003cli\u003eAntenna Connector: IPEX1\u003c\/li\u003e\n\u003cli\u003eCompatibility: FrSky 2.4GHz ACCESS \/ ACCST D16 capable transmitters\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Frsky","offers":[{"title":"Default Title","offer_id":44922939310150,"sku":"03020125","price":46.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0412\/2761\/files\/1_28_4_4d4ebc36-b387-4c1c-88bd-a8196766f8d1.png?v=1776652791"}],"url":"https:\/\/www.nextfpv.com\/es\/collections\/frsky-receivers.oembed?page=2","provider":"Next FPV","version":"1.0","type":"link"}