NEXTFLEX 3D PRINTING TPU FILAMENT 0.8KG 1.75MM

Save 24%
SAINSMARTSKU: NEXTPU-BLACK
8 reviews

Style: BLACK
Price:
Sale price$32 Regular price$42

Shipping calculated at checkout

Stock:
In stock (12 units), ready to be shipped

Description

Nextflex 3D TPU filament is featured by its high strength and flexibility, a hybrid of plastic and rubber. It is of the same factory as sainsmart and is the same apart from the packaging. It's from the same OEM manufacturer.

95A TPU has high abrasion resistance and low compression compared to rubber parts, especially at higher infill. Most of our drone parts are made of TPU as the flexibility allows for more bounce back in a crash and less of a chance of the print completely smashing.

In comparison with most common filaments like PLA and ABS, TPU must be run much slower.

TPU Specifications

  • Material: Rep-Flex TPU - Vacuumed Sealed with desiccant
  • Shore Hardness: 95A
  • Weight: 1 KG (approximately 2.20 lb) Spool Weight Total, Net Weight 0.8 KG
  • Diameter: 1.75mm (+/- 0.05mm)
  • Roundness: 1.75mm (+/- 0.03mm)
  • Recommended extruder temperature:195 - 230°C
  • Recommended platform temperature: 40 - 60°C

TPU PRINTING TIPS

  • Recommended for printers with direct drive extruder, 0.4~0.8mm Nozzles - We are going be honest with you, if you have Bowden, we don't suggest to try printing TPU. It will just cause headaches and you'll want to throw your printer out the window.
  • TPU is extremely hygroscopic (absorbs moisture from the air). Even if the roll is brand new it will have moisture in it and won't print well. We recommend that all spools be dried before printing as it will greatly improve print quality. If you are getting poor print results the most likely cause is that the roll has absorbed moisture. Drying should be done at 50 degC for 4 hours at least for best results. We put all our new rolls in for 48 hours before printing.
  • With that in mind, you will want to try some different settings to your normal PLA or other materials.
  • Print slow 15-30 mm/s Printing speed
  • First layer settings. (Height 100% Width 150% speed 50% e.g.)
  • Retraction disabled. This would reduce messy, stringing or oozing printing result.
  • Increase Multiplier(Optional). set to 1.1 would help the filament bond well.
  • fan on after layer.


FPV USES:

  • GoPro Mounts
  • FPV Cam Mounts
  • SMA Antenna Mounts
  • Arm Protectors
  • Turtle Mode Fins
  • DJI Air Unit/ Caddx Vista Mounts

PACKAGE INCLUDES:

  • 1 x Nextflex TPU 1.75mm 0,8kg 3D Printer Filament

Buy in bulk and save!

Qty Discount Coupon Code
Buy 5 5% Off BULK5
Buy 10 8% Off BULK10
Buy 20 10% Off BULK20
Buy 40 12% Off BULK40

 

Want something printed? Shoot us an email and we'll do a great price for you.

 


Estimate shipping

Customer Reviews
5.0 Based on 8 Reviews
5 ★
100% 
8
4 ★
0% 
0
3 ★
0% 
0
2 ★
0% 
0
1 ★
0% 
0
Customer Photos
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
J
05/10/2022
Jonathan
Australia Australia

Best TPU in Aus

I used a food dehydrator to dry it and it printed perfectly. Just as easy as printing PLA.

A
25/08/2022
Anonymous
Australia Australia

Excellent TPU

Took a little experimentation to dial in the settings, but once dialled in, it prints beautifully.

A
18/03/2022
Anonymous
Australia Australia

Nextflex

The filament is very good, prints exactly the same as Sainsmart TPU

NF
17/01/2022
Nadav F.
Australia Australia

Very nice TPU to print with

This TPU prints very well with minimal stringing after an hour in the oven on 65 degrees. Would buy again

SE
04/08/2021
Samuel E.
Australia Australia

best tpu ive tried so far

loved this tpu and think is the best tpu avalible in australia did a video review with samples- https://youtu.be/n6VygMw4sAA can recomend

You may also like

Recently viewed